Home page Home page Hobbies & Garden Development boards Bluetooth 5.0 audio receiver PRO board with microphone Volume and track buttons Power switch Micro USB 3.5 mm jack Battery pads Black
Bluetooth 5.0 audio receiver PRO board with microphone Volume and track buttons Power switch Micro USB 3.5 mm jack Battery pads Black

Bluetooth 5.0 audio receiver PRO board with microphone Volume and track buttons Power switch Micro USB 3.5 mm jack Battery pads Black

PRO Bluetooth receiver board for DIY projects with buttons, power switch, microphone and battery pads. Powered via Micro USB, with a 3.5 mm jack output. Full description
In stock
€4.76
Price incl. VATImport charges will apply
Safe shopping Safe shopping
Overview
Bluetooth 5.0 audio receiver PRO board with microphone Volume and track buttons Power switch Micro USB 3.5 mm jack Battery pads Black

This PRO version Bluetooth audio receiver board is designed for DIY enthusiasts who want to add wireless playback to an old speaker, radio or their own amplifier. The module uses Bluetooth 5.0 technology and includes an audio decoder that converts the wireless transmission into an analogue signal. The board is fitted with three tactile buttons for playback and volume control, with a sliding ON/OFF switch alongside them. It also features a small microphone marked MIC and a 3.5 mm jack socket. Power is supplied via the Micro USB connector or solder pads.

The labels on the board indicate the functions of each button: STOP/PLAY for play and pause, V+/NEXT for increasing the volume and skipping to the next track, and V-/BACK for reducing the volume and returning to the previous track. For permanent installation, there are B+ and B- solder pads for connecting a battery, as well as 5 V and GND pads for power. The underside has an antenna printed directly onto the board, and there are mounting holes in the corners for securing it inside an enclosure. Audio output is provided by the 3.5 mm jack socket, which accepts headphones, active speakers or a cable connected to an amplifier input. The module is designed for a supply voltage of 3.7 to 5 V.

  • Type – PRO Bluetooth audio receiver in board form
  • Bluetooth version – 5.0
  • Controls – STOP/PLAY, V+/NEXT and V-/BACK buttons
  • Power switch – sliding ON/OFF
  • Microphone – fitted on the board
  • Power supply – Micro USB connector or solder pads
  • Supply voltage – 3.7 to 5 V
  • Solder pads – B+ and B- for a battery, 5 V and GND
  • Audio output – 3.5 mm jack socket
  • Board colour – black
  • Package contents – 1 PRO Bluetooth audio receiver board, without cables or enclosure

The board is supplied without an enclosure, so protect it from moisture, dust and short circuits when installing it, and ensure that the underside does not touch any metal parts. Do not cover the antenna with metal, and observe the correct polarity when soldering wires to the battery. Before connecting it for the first time, check that the power supply is within the specified voltage range and test the board outside the enclosure first. Once you have confirmed that it works, secure it permanently using screws in the mounting holes.

The PRO board is a handy basis for a DIY wireless speaker or for repairing an old radio, as in addition to receiving music it also offers buttons for controlling tracks and volume. The battery pads and mounting holes make it easy to fit into a portable project. Power via Micro USB works with a standard charger, while the 3.5 mm jack output connects the board to headphones or an amplifier. The onboard power switch and microphone save you the work of adding extra components. The black board, with a voltage range of 3.7 to 5 V, is suitable for both beginner and experienced DIY enthusiasts.

Price incl. VAT €4.76