LUNZO s.r.o. (Czechia) · info@lunzo.ie · +420 603 337 330 · Mon–Sun 8:00–17:00 Irish time · Contact Us

Home page Home page Auto & Moto Car Electronics Power Inverters Automatic Source Switch ATS 4P 125 A 230 V Manual and Automatic Mode Source Indicators for DIN Rail White for Generator and Backup
Automatic Source Switch ATS 4P 125 A 230 V Manual and Automatic Mode Source Indicators for DIN Rail White for Generator and Backup

Automatic Source Switch ATS 4P 125 A 230 V Manual and Automatic Mode Source Indicators for DIN Rail White for Generator and Backup

Automatically switches power from the mains to the generator during a power outage. Four poles, voltage 230 V and current 125 A with manual and automatic mode selection. Full description
In stock
€88.60
Safe shopping Safe shopping
Overview
Automatic Source Switch ATS 4P 125 A 230 V Manual and Automatic Mode Source Indicators for DIN Rail White for Generator and Backup

The automatic source switch monitors the power supply and during a network outage, it switches the load to the backup source. The device is four-pole with a rated current of 125 A and operates at 230 V, thus covering the distribution including the neutral conductor. Source A is designated for the mains, source B for the generator or other backup power supply. The switch can be toggled to manual or automatic mode using a sliding control. Indicators A and B show the active source. The body is white with a red rotary lever and transparent terminal covers.

Features:

  • Rated current 125 A — capacity for high consumption distribution.
  • Voltage 230 V — operating voltage of the switch.
  • Four poles — 4P design for three phases and neutral conductor.
  • Source A for mains — main power supply from the distribution network.
  • Source B for generator — backup power during an outage.
  • Manual and automatic mode — selection via sliding switch.
  • Rotary lever — manual switching between positions A and B.
  • Indicators A and B — indication of the active source.
  • Signal terminal block — NC, C, and NO contacts for both sources.
  • Terminals for both sources — connections on both the top and bottom sides.
  • Transparent terminal covers — protection for connected wires.
  • DIN rail mounting — installation into a standard distribution board.
  • White colour — body with a red lever and coloured indicators.

Package contents:

  • 1x automatic source switch

The switch is useful in a family home, cottage, workshop, server room, or business where a power outage means a problem. The four-pole design with a current of 125 A covers the entire distribution including the neutral conductor even during high consumption. Manual mode allows for a hard switch of the source during inspection or maintenance, but be aware that manual switching is only possible in the Manual position. Indicators A and B show at a glance which source is currently powering the load. DIN rail mounting allows for installation into an existing distribution board without modifications to the cabinet.

Price incl. VAT €88.60