LUNZO s.r.o. (Czechia) · info@lunzo.ie · +420 603 337 330 · Mon–Sun 8:00–17:00 Irish time · Contact Us

Home page Home page Auto & Moto Car Electronics Power Inverters Automatic Source Switch ATS 4P 100 A Manual and Automatic Mode Source Indicators for DIN Rail White for Generator and Backup Power Supply
Automatic Source Switch ATS 4P 100 A Manual and Automatic Mode Source Indicators for DIN Rail White for Generator and Backup Power Supply

Automatic Source Switch ATS 4P 100 A Manual and Automatic Mode Source Indicators for DIN Rail White for Generator and Backup Power Supply

Automatically switches power from the mains to the generator during a power outage. Four poles, current 100 A and selection of manual and automatic mode. For DIN rail. Full description
In stock
€89.91
Safe shopping Safe shopping
Overview
Automatic Source Switch ATS 4P 100 A Manual and Automatic Mode Source Indicators for DIN Rail White for Generator and Backup Power Supply

The automatic source switch monitors the power supply and switches the load to the backup source during a power outage. The device is four-pole with a rated current of 100 A, making it suitable for three-phase distribution including the neutral conductor. Source A is designated for the mains, source B for the generator or other backup power supply. The switch can be toggled to manual or automatic mode using a sliding control. Indicators A and B show the active source. The body is white with a red toggle lever and transparent terminal covers.

Features:

  • Rated current 100 A — capacity for higher consumption distribution.
  • Four poles — 4P design for three phases and a neutral conductor.
  • Source A for mains — main power supply from the distribution network.
  • Source B for generator — backup power supply during outages.
  • Manual and automatic mode — selection via sliding switch.
  • Toggle lever — manual switching between positions A and B.
  • Indicators A and B — indication of active source.
  • Signal terminal block — NC, C, and NO contacts for both sources.
  • Terminals for both sources — connections on both the top and bottom sides.
  • Transparent terminal covers — protection for connected wires.
  • DIN rail mounting — installation in a standard distribution board.
  • White colour — body with red lever and coloured indicators.

Package Contents:

  • 1x automatic source switch

The switch is useful in a family home, at a cottage, in a workshop, in a server room, and in a business where a power outage poses a problem. The four-pole design covers the entire three-phase distribution including the neutral conductor, so there is no need to address separate switching of N. The manual mode allows the source to be switched hard during inspection or maintenance, but be aware that manual switching is only possible in the Manual position. Indicators A and B clearly show which source is currently supplying the load. DIN rail mounting allows installation into an existing distribution board without cabinet modifications.

Price incl. VAT €89.91