LUNZO s.r.o. (Czechia) · info@lunzo.ie · +420 603 337 330 · Mon–Sun 8:00–17:00 Irish time · Contact Us

Home page Home page Auto & Moto Car Electronics Power Inverters Automatic Source Switch ATS 3P 63 A 230 V Switching in 50 ms Manual and Automatic Mode for DIN Rail Black for Generator and Backup
Automatic Source Switch ATS 3P 63 A 230 V Switching in 50 ms Manual and Automatic Mode for DIN Rail Black for Generator and Backup

Automatic Source Switch ATS 3P 63 A 230 V Switching in 50 ms Manual and Automatic Mode for DIN Rail Black for Generator and Backup

Automatically switches power from the grid to the generator during a power outage. Three poles, current 63 A and switching in 50 ms with manual and automatic mode selection. Full description
In stock
€79.43
Safe shopping Safe shopping
Overview
Automatic Source Switch ATS 3P 63 A 230 V Switching in 50 ms Manual and Automatic Mode for DIN Rail Black for Generator and Backup

The automatic source switch monitors the power supply and, in the event of a power failure, switches the load to the backup source. Switching takes less than 50 ms, so the connected devices are practically uninterrupted. The device is three-pole with a rated current of 63 A and operates at a voltage of 230 V. Source A is intended for the grid, while Source B is for the generator or other backup power supply. The switch can be toggled to manual or automatic mode using a sliding control. The body is black with a red toggle lever and dimensions of 17 x 15 x 11 cm.

Features:

  • Rated current 63 A — capacity for domestic and smaller operational distribution.
  • Three poles — 3P design for distribution with multiple conductors.
  • Voltage 230 V — operating voltage of the switch.
  • Switching time of 50 ms — minimal interruption of supply.
  • Source A for the grid — main power supply from the distribution network.
  • Source B for the generator — backup power during an outage.
  • Manual and automatic mode — selection via a sliding switch.
  • Toggle lever — manual switching between positions A and B.
  • Indicators A and B — indication of the active source.
  • Signal terminal block — NC, C, and NO contacts for both sources.
  • DIN rail mounting — installation into a standard distribution board.
  • Dimensions 17 x 15 x 11 cm — compact design.
  • Black colour — body with a red lever and transparent terminal covers.

Package contents:

  • 1x automatic source switch

The switch is useful in a family home, at a cottage, in a workshop, in a server room, or in a business where a power outage poses a problem. Switching time of 50 ms is so short that most devices do not even notice the outage. Manual mode allows for a hard switch of the source during inspection or maintenance of the distribution. Indicators A and B show at a glance which source is currently powering the load. DIN rail mounting allows for installation into an existing distribution board without modifications to the enclosure.

Price incl. VAT €79.43