LUNZO s.r.o. (Czechia) · info@lunzo.ie · +420 603 337 330 · Mon–Sun 8:00–17:00 Irish time · Contact Us

Home page Home page Auto & Moto Car Electronics Power Inverters Automatic Source Switch ATS 3P 100 A 230 V Switching in 50 ms Manual and Automatic Mode on DIN Rail Black for Generator and Backup
Automatic Source Switch ATS 3P 100 A 230 V Switching in 50 ms Manual and Automatic Mode on DIN Rail Black for Generator and Backup

Automatic Source Switch ATS 3P 100 A 230 V Switching in 50 ms Manual and Automatic Mode on DIN Rail Black for Generator and Backup

Automatically switches power from the mains to the generator during a power outage. Three poles, current 100 A and switching in 50 ms with manual and automatic mode selection. Full description
In stock
€79.43
Safe shopping Safe shopping
Overview
Automatic Source Switch ATS 3P 100 A 230 V Switching in 50 ms Manual and Automatic Mode on DIN Rail Black for Generator and Backup

The automatic source switch monitors the power supply and switches the load to the backup source during a power outage. Switching takes less than 50 ms, so connected devices experience virtually no interruption. The device is three-pole with a rated current of 100 A and operates at a voltage of 230 V. Source A is intended for the mains, while source B is for the generator or other backup power supply. The switch can be toggled into manual or automatic mode using a sliding control. The body is black with a red toggle lever and dimensions of 17 x 15 x 11 cm.

Features:

  • Rated current 100 A — capacity for higher consumption distribution.
  • Three poles — 3P design for multi-wire distribution.
  • Voltage 230 V — operating voltage of the switch.
  • Switching time of up to 50 ms — minimal interruption of supply.
  • Source A for the mains — main power from the distribution network.
  • Source B for the generator — backup power during outages.
  • Manual and automatic mode — selection via sliding switch.
  • Toggle lever — manual switching between positions A and B.
  • Indicators A and B — indication of the active source.
  • Signal terminal block — NC, C, and NO contacts for both sources.
  • DIN rail mounting — installation into a standard distribution board.
  • Dimensions 17 x 15 x 11 cm — compact design.
  • Black colour — body with a red lever and transparent terminal covers.

Package Contents:

  • 1x automatic source switch

The switch is useful in a family home, at a cottage, in a workshop, in a server room, or in a business where a power outage means trouble. Switching time of up to 50 ms is so short that most devices do not even notice the outage. Manual mode allows for hard switching of the source during inspection or maintenance of the distribution. Indicators A and B show at a glance which source is currently powering the load. DIN rail mounting allows for installation into an existing distribution board without modifications to the enclosure.

Price incl. VAT €79.43