LUNZO s.r.o. (Czechia) · info@lunzo.ie · +420 603 337 330 · Mon–Sun 8:00–17:00 Irish time · Contact Us

Home page Home page Auto & Moto Car Electronics Power Inverters Automatic Source Switch ATS 3P 100 A 230 V Manual and Automatic Mode Source Indicators for DIN Rail White for Generator and Backup
Automatic Source Switch ATS 3P 100 A 230 V Manual and Automatic Mode Source Indicators for DIN Rail White for Generator and Backup

Automatic Source Switch ATS 3P 100 A 230 V Manual and Automatic Mode Source Indicators for DIN Rail White for Generator and Backup

Automatically switches power from the mains to the generator during a power outage. Three poles, voltage 230 V and current 100 A with manual and automatic mode selection. Full description
In stock
€81.18
Safe shopping Safe shopping
Overview
Automatic Source Switch ATS 3P 100 A 230 V Manual and Automatic Mode Source Indicators for DIN Rail White for Generator and Backup

The automatic source switch monitors the power supply and switches the load to the backup source during a power outage. The device is three-pole with a rated current of 100 A and operates at a voltage of 230 V. Source A is designated for the mains, while source B is for the generator or other backup power. The switch can be toggled to manual or automatic mode using a sliding control. Indicators A and B show the active source. The body is white with a red toggle lever and transparent terminal covers.

Features:

  • Rated current 100 A — capacity for higher consumption distribution.
  • Voltage 230 V — operating voltage of the switch.
  • Three poles — 3P design for multi-conductor distribution.
  • Source A for mains — primary power from the distribution network.
  • Source B for generator — backup power during outages.
  • Manual and automatic mode — selection via sliding switch.
  • Toggle lever — manual switching between positions A and B.
  • Indicators A and B — indication of the active source.
  • Signal terminal block — NC, C, and NO contacts for both sources.
  • Terminals for both sources — connections on both the top and bottom sides.
  • Transparent terminal covers — protection for connected wires.
  • DIN rail mounting — installation into a standard distribution board.
  • White colour — body with a red lever and coloured indicators.

Package contents:

  • 1x automatic source switch

The switch is useful in a family house, at a cottage, in a workshop, in a server room, or in a business where a power outage means a problem. Automatic mode ensures switching to the backup source without operator intervention, so you do not have to worry about the outage. Manual mode allows you to switch the source manually during inspection or maintenance, but be aware that manual switching is only possible in the Manual position. Indicators A and B show at a glance which source is currently powering the load. DIN rail mounting allows installation into an existing distribution board without cabinet modifications.

Price incl. VAT €81.18