LUNZO s.r.o. (Czechia) · info@lunzo.ie · +420 603 337 330 · Mon–Sun 8:00–17:00 Irish time · Contact Us

Home page Home page Auto & Moto Car Electronics Power Inverters Automatic Source Switch ATS 2P 125 A 230 V Switching within 50 ms Manual and Automatic Mode for DIN Rail Black for Generator and Backup
Automatic Source Switch ATS 2P 125 A 230 V Switching within 50 ms Manual and Automatic Mode for DIN Rail Black for Generator and Backup

Automatic Source Switch ATS 2P 125 A 230 V Switching within 50 ms Manual and Automatic Mode for DIN Rail Black for Generator and Backup

Automatically switches power from the mains to the generator during a power outage. Two poles, current 125 A and switching within 50 ms with manual and automatic mode selection. Full description
In stock
€73.76
Safe shopping Safe shopping
Overview
Automatic Source Switch ATS 2P 125 A 230 V Switching within 50 ms Manual and Automatic Mode for DIN Rail Black for Generator and Backup

The automatic source switch monitors the power supply and switches the load to the backup source during a power outage. Switching takes less than 50 ms, so connected appliances are practically uninterrupted. The device is two-pole with a rated current of 125 A and operates at a voltage of 230 V. Source A is intended for the mains, source B for the generator or other backup power supply. The switch can be toggled to manual or automatic mode using a sliding control. The body is black with a red toggle lever and dimensions of 17 x 15 x 11 cm.

Features:

  • Rated current 125 A — capacity for high consumption distribution.
  • Two poles — 2P design for phase and neutral conductor.
  • Voltage 230 V — connection to a standard single-phase network.
  • Switching time within 50 ms — minimal interruption of supply.
  • Source A for mains — main power supply from the distribution network.
  • Source B for generator — backup power during outage.
  • Manual and automatic mode — selection with a sliding switch.
  • Toggle lever — manual switching between positions A and B.
  • Indicators A and B — indication of the active source.
  • Signal terminal block — NC, C, and NO contacts for both sources.
  • DIN rail mounting — installation in a standard distribution board.
  • Dimensions 17 x 15 x 11 cm — compact design.
  • Black colour — body with red lever and transparent terminal covers.

Contents of the package:

  • 1x automatic source switch

The switch is useful in family homes, holiday cottages, workshops, server rooms, and businesses where a power outage means a problem. Switching time within 50 ms is so short that most appliances do not even notice the outage. Manual mode allows for a hard switch of the source during inspection or maintenance of the distribution. Indicators A and B show at a glance which source is currently supplying the load. DIN rail mounting allows for installation in an existing distribution board without cabinet modifications.

Price incl. VAT €73.76