LUNZO s.r.o. (Czechia) · info@lunzo.ie · +420 603 337 330 · Mon–Sun 8:00–17:00 Irish time · Contact Us

Home page Home page Home & Household Supplies Lighting Art-Net to DMX512 Converter 2 Ports RDM and sACN 1024 Channels Display with Menu Control Power 5 V DC 500 mA Black for Lighting and Clubs
Art-Net to DMX512 Converter 2 Ports RDM and sACN 1024 Channels Display with Menu Control Power 5 V DC 500 mA Black for Lighting and Clubs

Art-Net to DMX512 Converter 2 Ports RDM and sACN 1024 Channels Display with Menu Control Power 5 V DC 500 mA Black for Lighting and Clubs

Interface for controlling lights over a network with RDM and sACN support. Capacity of 1024 channels, Ethernet connector, display with Menu, Enter, Up and Down buttons. Full description
In stock
€200.39
Safe shopping Safe shopping
Overview
Art-Net to DMX512 Converter 2 Ports RDM and sACN 1024 Channels Display with Menu Control Power 5 V DC 500 mA Black for Lighting and Clubs

The Art-Net to DMX512 converter transmits control data for lighting from a computer network to the lighting setup. The device offers two ports with RDM support and a total capacity of 1024 DMX512 channels. Configuration can be done on-site using the display and the Menu, Enter, Up, and Down buttons, without the need to connect a computer. The sACN protocol is also supported, with its status indicated by a separate LED. Power is supplied via a 5 V DC 500 mA connector, so a standard adapter or power bank is sufficient.

Features:

  • Art-Net to DMX512 — conversion of control signals from a standard computer network to the DMX512 standard.
  • Two ports — splitting the setup into two lines from one device.
  • RDM support — bidirectional communication with fixtures that support this protocol.
  • sACN support — alternative protocol with its own LED indication on the front panel.
  • Capacity of 1024 channels — space for a larger lighting setup without the need for additional interfaces.
  • Display — showing the current settings directly on the device.
  • Control buttons — Menu, Enter, Up, and Down for navigating the menu and changing parameters.
  • Ethernet connector — RJ45 socket with status indicators for network connection.
  • Power supply 5 V DC 500 mA — low power requirements and the ability to operate from a standard adapter.
  • Power button — separate power switch on the front panel.
  • Compact body — small dimensions that take up minimal space in a rack or on a truss.
  • Black colour — design matching standard stage equipment.

Package contents:

  • 1x Art-Net to DMX512 converter

The converter is suitable for use in clubs, bars, concerts, balls, and for sound and lighting at smaller events. Network control means that only a standard network cable is needed between the computer and the lights, eliminating the need for running separate lines throughout the space. Control via the display and buttons allows for changing the address or mode directly on-site, even when a computer is not available. RDM and sACN support expands its use to fixtures and software that require these protocols. The 5 V DC power supply simplifies setup, as it can work with a standard network adapter.

Price incl. VAT €200.39