Home page Home page Pet Supplies Aquarium Supplies Aquarium Accessories Aquarium Non-Return Valves 10 pcs One-Way Air Valve 43 mm Plastic Protects Air Pump from Water
Aquarium Non-Return Valves 10 pcs One-Way Air Valve 43 mm Plastic Protects Air Pump from Water

Aquarium Non-Return Valves 10 pcs One-Way Air Valve 43 mm Plastic Protects Air Pump from Water

One-way valves for air tubing stop water from flowing back into the pump when the compressor is switched off. Easy to fit in an aquarium air line. Full description
In stock
Colour:
€13.49
Price incl. VATImport charges will apply
Safe shopping Safe shopping
Overview
Aquarium Non-Return Valves 10 pcs One-Way Air Valve 43 mm Plastic Protects Air Pump from Water

Aquarium non-return valves are small but very useful components for any air line. The pack contains 10 one-way valves, which allow air to flow in one direction only, from the air pump towards the aquarium. When the compressor is switched off, for example during a power cut or maintenance, the valve prevents water from flowing back along the tubing into the pump. Each valve is made from clear plastic, so its internal seal is visible and it is easy to check whether it is clean. The valves are suitable for freshwater and marine aquariums, ponds with a small compressor and breeding tanks.

The valve has an overall length of 43 mm and 4 mm diameter barbed connectors at both ends, onto which standard air tubing fits. The direction of flow is marked on the body with IN and OUT, or with an arrow, so it is immediately clear which side connects to the pump and which to the air stone. Thanks to its small size, the valve can be tucked away behind a cabinet or the back wall of the tank without detracting from the aquarium's appearance. The pack of ten is enough for several separate air circuits, and any remaining valves can be kept as spares.

  • Type – one-way non-return valve for air lines
  • Use – aquariums and ponds with an air pump
  • Material – plastic
  • Length – 43 mm
  • Barb diameter – 4 mm
  • Flow direction – marked on the valve body (IN and OUT)
  • Power supply – not required, operates automatically
  • Pack contents – 10 non-return valves

Installation is simple. Cut the air tubing between the pump and the aquarium, fit one end onto the valve inlet marked IN and the other onto the outlet marked OUT. It is best to position the valve as close to the pump as possible and, ideally, above the water level. If the compressor is positioned below the water level, a non-return valve is practically essential. Check the valve from time to time and rinse it with clean water if dirt builds up, so that air can flow freely. The valve must not be fitted the wrong way round, otherwise air will not pass through. If no bubbles come out of the air stone after installation, simply turn the valve round. For an aquarium with several air stones and a manifold, we recommend fitting one valve just after the pump, or alternatively a further valve in each branch of the air line.

This set of ten non-return valves is a practical accessory for any aquarist who wants to protect their air pump from water. Made from plastic, the valves are lightweight and discreet, and can be fitted in moments without tools. They are suitable for a new aquarium or for replacing old parts in an established tank. This simple solution helps prevent compressor damage and unnecessary water-related accidents around the aquarium, and the 4 mm barbs fit standard air tubing.

Price incl. VAT €13.49