Home page Home page Pet Supplies Ant farms Ant Nesting Module Cube Pro 60 x 60 x 86 mm Chamber with Transparent Wall and Upper Transparent Extension 3 x 10 mm Entrances Grey
Ant Nesting Module Cube Pro 60 x 60 x 86 mm Chamber with Transparent Wall and Upper Transparent Extension 3 x 10 mm Entrances Grey

Ant Nesting Module Cube Pro 60 x 60 x 86 mm Chamber with Transparent Wall and Upper Transparent Extension 3 x 10 mm Entrances Grey

Tall single nesting module in a 1 x 1 configuration with two levels, a lower chamber with a transparent wall and a transparent upper extension. 18 ml of water recommended. Full description
In stock
€25.28
Price incl. VATImport charges will apply
Safe shopping Safe shopping
Overview
Ant Nesting Module Cube Pro 60 x 60 x 86 mm Chamber with Transparent Wall and Upper Transparent Extension 3 x 10 mm Entrances Grey

The Cube Pro ant nesting module is a tall single unit for a modular formicarium, in a 1 x 1 module configuration. Measuring 60 x 60 x 86 mm, it occupies the same footprint as other single modules but gives the colony two levels. The lower section is a nesting chamber with sand walls and a sand floor, visible from the front through a transparent front wall screwed to the frame. Above it is a transparent upper extension with a sand floor and grey lid, which can be viewed from all sides. This gives the colony extra space while providing you with a good view of both levels.

The manufacturer recommends adding 18 ml of water to the module and rates the nest humidity at 1.5 out of 3, making it a relatively dry nest. The module connects to other parts of the system using 3 inlet holes with a diameter of 10 mm. The modules fit side by side, allowing you to expand your formicarium over time with additional nests, feeding arenas and accessories from the same system. The transparent front wall of the lower chamber can be covered with the removable red cover provided, which still allows you to see inside.

  • Type – nesting module for a modular formicarium
  • Model – Cube Pro
  • Configuration – 1 x 1 module
  • Dimensions – 60 x 60 x 86 mm
  • Internal layout – lower chamber with sand walls and floor, and a transparent upper extension
  • Front wall – transparent, screwed to the frame
  • Humidity – level 1.5 out of 3 according to the manufacturer
  • Recommended amount of water – 18 ml
  • Inlet holes – 3 holes with a diameter of 10 mm
  • Material – plastic
  • Cover – red, transparent, removable
  • Assembly – required; screws included
  • Colour – grey
  • Package contents – Cube Pro nesting module with upper extension, red cover and 2 screws

Add water slowly and in small amounts to prevent puddles forming in the chamber. Place the module on a flat, stable surface away from direct sunlight and heat sources, which could quickly evaporate the water and unnecessarily warm the transparent extension. Keep any inlet holes you are not using closed to ensure the ants remain inside the set-up. Wipe the frame and transparent parts with a soft, dry cloth, without using aggressive cleaning products.

The Cube Pro model combines two levels within a single footprint and offers the best view inside the nest of any module in the single-unit range. Its standard dimensions mean it fits alongside other nests, arenas and tube modules from the same system. The grey frame, transparent walls and red cover create a discreet look, while keeping the colony’s activity clearly visible. It is suitable for keepers who want to expand their set-up upwards and gain a two-level nest that takes up little space. Add modules over time to easily adapt the formicarium to the size of the colony.

Price incl. VAT €25.28