Home page Home page Hobbies & Garden Measuring Instruments Voltage Testers ANENG B22 Voltage Tester Screwdriver Non-Contact 30–1000 V AC LCD Display Ratchet USB-C Charging For Electricians
ANENG B22 Voltage Tester Screwdriver Non-Contact 30–1000 V AC LCD Display Ratchet USB-C Charging For Electricians

ANENG B22 Voltage Tester Screwdriver Non-Contact 30–1000 V AC LCD Display Ratchet USB-C Charging For Electricians

Rechargeable tester screwdriver with ratchet detects live wires without contact, measures 3–600 V AC, locates breaks in wires and checks circuit continuity. Full description
In stock
Colour:
€28.34
Price incl. VATImport charges will apply
Safe shopping Safe shopping
Overview
ANENG B22 Voltage Tester Screwdriver Non-Contact 30–1000 V AC LCD Display Ratchet USB-C Charging For Electricians

The ANENG B22 voltage tester combines a screwdriver and a digital tester in one tool, so you do not have to keep switching tools when working on electrical installations. Non-contact detection operates across a range of 30–1000 V AC and identifies a live wire in a socket or cable simply by bringing the tip close to it. On direct contact, it measures AC voltage from 3 to 600 V and displays the reading on the backlit LCD. It is powered by a built-in 14500 battery with a capacity of 300 mAh, rechargeable using the supplied cable via the USB-C port. This means there is no need to buy or replace button-cell batteries.

The display lights green when the electrical field is weak and red when the field is strong or a live wire is detected, accompanied by an audible signal. The field strength is displayed in three levels, making it easy to distinguish the live and neutral wires. The wire-break location function helps find damaged sections of cable, while the continuity test displays 0 and beeps. The screwdriver has a three-position reversible ratchet and a double-ended bit with flat and Phillips ends, which can be extended by pressing the ratchet head.

  • Model – ANENG B22
  • Non-contact voltage detection – 30–1000 V AC
  • Contact voltage measurement – 3–600 V AC, 50–60 Hz
  • Indication – change in display backlight colour and audible signal
  • Additional functions – live and neutral wire identification, wire-break location, continuity test, data hold, low battery warning
  • Automatic switch-off – after 5 minutes of inactivity
  • Screwdriver – three-position reversible ratchet, double-ended flat and Phillips bit, bit extends up to 6.96 cm
  • Power supply – 14500 3.7 V 300 mAh battery, rechargeable via USB-C
  • Dimensions – overall length 21.1 cm, handle length 14.1 cm, width 3.63 cm, bit length 9.8 cm
  • Handle – insulated, with a rubberised surface
  • Package contents – tester screwdriver with battery fitted, storage case, charging cable, instructions, box

The tester is suitable for electrical installation repairs in the home and distribution boards, checking sockets, switches and extension leads, repairing household appliances, and maintaining vehicle electrical systems. Switch it on by holding the button for approximately two seconds; measurements are started using the touch button. After use, store it in the supplied case to prevent damage to the display and bit. Recharge the battery before extended storage and protect the tester from moisture and drops.

The ANENG B22 is a practical tool for electricians, maintenance workers and DIY enthusiasts who want to keep a screwdriver and voltage tester close at hand. It combines non-contact live wire detection, voltage measurement and continuity testing with the convenience of tightening screws using the ratchet. The backlit two-colour LCD is easy to read, even in a poorly lit distribution board or ceiling void. USB-C charging means the tool is always ready to use, with no need to worry about replacement batteries. Carry the complete set in its compact case in your tool bag or car.

Price incl. VAT €28.34