Home page Home page Hobbies & Garden Gardening Supplies Garden Tools All-metal soil cultivator with 4 tines 30 cm Head 6 x 8 cm Hollow metal socket 15 cm Garden tool for weeding and aerating beds
All-metal soil cultivator with 4 tines 30 cm Head 6 x 8 cm Hollow metal socket 15 cm Garden tool for weeding and aerating beds

All-metal soil cultivator with 4 tines 30 cm Head 6 x 8 cm Hollow metal socket 15 cm Garden tool for weeding and aerating beds

Four steel tines break up even compacted soil and firmly anchored weed rootballs. The hollow socket provides a grip and keeps the tool on a single metal axis. Full description
In stock
€23.97
Price incl. VATImport charges will apply
Safe shopping Safe shopping
Overview
All-metal soil cultivator with 4 tines 30 cm Head 6 x 8 cm Hollow metal socket 15 cm Garden tool for weeding and aerating beds

This all-metal cultivator with four tines is designed to aerate compacted soil and remove weeds with their roots. The working head consists of four 4 cm-long steel tines, which go under the plant, lift the rootball and also break up the soil in the top layer of the bed. Its overall length of 30 cm keeps your hand away from the soil and allows you to reach the middle of a narrower bed without stepping on the soil. The head is 6 cm wide and 8 cm high, so it can pass between more closely planted plants. The bent neck transfers the pulling force directly to the tines, so a short pull towards you is all it takes to lift the root.

The tool is metal along its entire length and is finished with a hollow socket that serves as a grip. The 15 cm-long socket makes up half the tool, allowing you to grasp it with your whole palm and direct the force straight to the tines. The design has no screws, joints or glued connections that could come loose when levering. The tines and neck are made of carbon steel, which retains its shape even when pushed into stony soil. The smooth metal surface is easy to clean of soil after use and dries quickly.

  • Overall length – 30 cm
  • Head width – 6 cm
  • Head height – 8 cm
  • Tine length – 4 cm
  • Number of tines – 4
  • Socket length – 15 cm
  • Material – carbon steel
  • Construction – all-metal, with no screwed connections
  • Package contents – 1 x all-metal cultivator with 4 tines and a hollow socket, without a wooden handle

When cultivating, guide the tines just below the surface and use short pulls towards you to break up the compacted layer, allowing air and water to reach it. To remove a weed, push the tines into the ground at an angle beside the plant, press them under the root and pull the socket towards you; the head will then lift the entire rootball. For plants with a long taproot, first loosen the soil around it so the root comes out whole and does not break. After use, rinse the tines with water, wipe them dry and occasionally coat them with a thin layer of oil, as carbon steel is sensitive to moisture.

You can use the cultivator in vegetable beds, raised beds, rock gardens and balcony planters. The four tines distribute the force over a wider area than a single point and are less likely to snap a root. The all-metal construction withstands pulling in compacted soil and has no connection that could loosen over time. The tool is compact, so you can hang it on a nail in the shed or store it with your other tools. The 15 cm hollow socket also provides plenty of room to grip it with both fingers, even when wearing gloves.

Price incl. VAT €23.97