LUNZO s.r.o. (Czechia) · info@lunzo.ie · +420 603 337 330 · Mon–Sun 8:00–17:00 Irish time · support in English · Contact Us

Home page Home page Hobbies & Garden Solar equipment Solar accessories 9 m Extension Cable with Solar Connector Photovoltaic Cable 16 AWG with 1.5 mm² Cross-section with Free End Red and Black For Panels
9 m Extension Cable with Solar Connector Photovoltaic Cable 16 AWG with 1.5 mm² Cross-section with Free End Red and Black For Panels

9 m Extension Cable with Solar Connector Photovoltaic Cable 16 AWG with 1.5 mm² Cross-section with Free End Red and Black For Panels

Set of two wires with a finished connector on one end and a free end on the other. Wire cross-section 1.5 mm² and colour coding of red and black insulation. Full description
In stock
€59.78
Safe shopping Safe shopping
Overview
9 m Extension Cable with Solar Connector Photovoltaic Cable 16 AWG with 1.5 mm² with Free End Red and Black For Panels

The 9 m photovoltaic extension cable is used to connect a solar panel to a charge controller, inverter, or other wiring in the system. It is supplied as a pair of wires in red and black, so the polarity is distinguished by the colour of the insulation, ensuring you won't make a mistake when connecting. The wire has a cross-section of 1.5 mm² according to the designation 16 AWG, which corresponds to standard domestic and mobile photovoltaic installations. One end is factory-fitted with a solar connector, while the other end remains free for connection to a terminal block or for custom termination. The stranded core provides the cable with the flexibility needed for routing around structural supports.

  • Length 9 m — covers even longer distances between the panel and equipment located in another part of the building
  • Cross-section 1.5 mm² — wire corresponding to the designation 16 AWG
  • Solar connector on one end — snap-in connection with pull-out prevention
  • Free end on the other side — terminate according to the connected device's requirements
  • Stranded core — the cable bends well and routes even in tighter spaces
  • Red and black insulation — colour coding for positive and negative wires
  • Pair of cables in the package — one piece carries positive, the other negative
  • Designed for photovoltaics — cable intended for DC wiring of solar systems

Package contents:

  • 1x cable with red insulation and solar connector
  • 1x cable with black insulation and solar connector

The cables are suitable for connecting the panel to the charge controller, extending existing wiring, or replacing a damaged piece in a functional system. The free end allows for custom termination — ferrule, cable eye, or direct connection to a terminal. Nine metres in length will cover the distance between the panel in the garden or on the roof and the controller located inside the building or caravan. When planning the wiring, keep in mind that voltage drop increases with the length of the run, so choose the shortest reasonable distance. The colour coding of the insulation makes it easier to check polarity during any later adjustments to the system.

Delivery and Returns
Price incl. VAT €59.78