Home page Home page PC & Laptop Accessories PC Components PC case accessories 5 V 3-pin ARGB Graphics Card Support Bracket Adjustable Height 70–125 mm Aluminium Alloy Magnetic Base GPU Sag Protection
5 V 3-pin ARGB Graphics Card Support Bracket Adjustable Height 70–125 mm Aluminium Alloy Magnetic Base GPU Sag Protection

5 V 3-pin ARGB Graphics Card Support Bracket Adjustable Height 70–125 mm Aluminium Alloy Magnetic Base GPU Sag Protection

Illuminated telescopic support bracket for a graphics card, with ARGB synchronisation via a 5 V 3-pin connector, screw-adjustable height and a strong magnet. Full description
In stock
€20.48
Price incl. VATImport charges will apply
Safe shopping Safe shopping
Overview
5 V 3-pin ARGB Graphics Card Support Bracket Adjustable Height 70–125 mm Aluminium Alloy Magnetic Base GPU Sag Protection

Modern graphics cards are long and heavy, so their rear end can sag over time inside a computer case. This illuminated support bracket sits beneath the unsupported end of the card and bears some of its weight, reducing the strain on the PCIe slot on the motherboard. The bracket height can be smoothly adjusted from 70–125 mm, allowing you to adapt it to the distance between the card and the bottom of the case or the power supply shroud. The bracket body is illuminated along its entire length, and its 5 V 3-pin ARGB connection lets you synchronise its lighting effects with the rest of your system’s lighting. It is suitable for ATX, M-ATX and ITX cases and, according to the seller, supports graphics cards of any length.

The construction consists of an illuminated outer post, a locking nut and an inner screw with a support head. Adjust the height by unscrewing the inner screw, then secure it in the required position with the locking nut, so the support does not lower itself during operation. There is a strong magnet on the underside to hold the support in place on the metal case floor or power supply shroud, without glue or drilling. The top is covered with a silicone pad that protects the card’s cooler from scratches and prevents it from slipping. It is made from an aluminium alloy combined with plastic, with a surface machined using CNC technology.

  • Type – anti-sag graphics card support bracket with ARGB lighting
  • Adjustable height – 70–125 mm
  • Post diameter – 16 mm
  • Material – aluminium alloy and plastic
  • Lighting – ARGB, 16.8 million colours
  • Connectors – 5 V 3-pin male and female for daisy-chaining
  • Synchronisation – ASUS, MSI, Gigabyte and ASRock
  • Mounting – magnetic base
  • Top surface – silicone pad to prevent scratches and slipping
  • Compatibility – ATX, M-ATX and ITX cases, graphics cards of any length
  • Package contents – 1x ARGB graphics card support bracket with 5 V 3-pin cable

The support bracket’s cable has both male and female 5 V 3-pin connectors, so you can connect it to an ARGB header on the motherboard or to a controller, then connect additional lighting in series. Always cover the unused male connector with an insulating cap to prevent a short circuit. Position the support as close as possible to the end of the card, adjust the height so the card just touches the top pad, and tighten the locking nut. Simply wipe dust from the surface occasionally with a soft, dry cloth.

This illuminated support bracket combines practical graphics card protection with a striking lighting feature inside your case. Smooth height adjustment and the magnetic base allow quick, tool-free installation in standard cases. The silicone pad protects the card’s cooler, while the locking nut keeps the height in place. Thanks to synchronisation via the ARGB connector, you can control colours and effects using the same software as the rest of your lighting. It is a suitable accessory for anyone who wants to protect an expensive graphics card while also enhancing the look of their gaming system.

Price incl. VAT €20.48