Home page Home page Hobbies & Garden Creative crafting and DIY kits EVA foam and craft materials 3D Printing Pen 18.4 x 3.1 x 4.1 cm Heating 60 to 245 °C 1.75 mm Filament PLA ABS HIPS and PVA 0.7 mm Ceramic Nozzle
3D Printing Pen 18.4 x 3.1 x 4.1 cm Heating 60 to 245 °C 1.75 mm Filament PLA ABS HIPS and PVA 0.7 mm Ceramic Nozzle

3D Printing Pen 18.4 x 3.1 x 4.1 cm Heating 60 to 245 °C 1.75 mm Filament PLA ABS HIPS and PVA 0.7 mm Ceramic Nozzle

Even beginners can draw with plastic directly in three dimensions. The pen heats the filament; you simply guide the line and watch your model take shape right under your hand in real time. Full description
In stock
Colour:
€63.71
Price incl. VATImport charges will apply
Safe shopping Safe shopping
Overview
3D Printing Pen 18.4 x 3.1 x 4.1 cm Heating 60 to 245 °C 1.75 mm Filament PLA ABS HIPS and PVA 0.7 mm Ceramic Nozzle

The 3D printing pen takes drawing off the page and into three dimensions. The plastic filament melts inside the pen, and you guide it with the tip exactly where you need it, creating a real three-dimensional shape right under your hand. Thanks to its adjustable temperature of 60 to 245 °C, the pen works with different types of material, and you can fine-tune the heat according to how the filament flows. It uses 1.75 mm diameter filament, available from regular 3D printing supplies. The display continuously shows the selected mode and the current tip temperature.

The pen offers two preset printing modes. In PLA mode, the tip heats to 185 °C; in ABS mode, it heats to 210 °C, and in both cases the temperature can be adjusted manually up or down. The material feed has eight speed settings, allowing you to choose slow, precise guidance for a fine line or faster filling of larger areas. Feed the filament manually using the button, or double-press it to switch on automatic feed and let the pen draw smoothly on its own. You can retract the filament just as easily when you want to change colour or material.

The tip features a ceramic nozzle with a diameter of 0.7 mm, which withstands high temperatures and maintains an even flow of molten plastic. The pen has a slim, lightweight body, so it feels much like holding a thick marker and your hand is less likely to tire during longer drawing sessions. If you leave the pen idle for ninety seconds, it goes to sleep automatically; press the button once to wake it up again.

  • Heating range – 60 to 245 °C with manual adjustment
  • Printing modes – PLA with a default temperature of 185 °C and ABS with a default temperature of 210 °C
  • Supported filaments – PLA, ABS, HIPS and PVA with a diameter of 1.75 mm
  • Feed speed – eight adjustable settings
  • Filament feed – manual and automatic, with retraction
  • Nozzle – ceramic, 0.7 mm diameter
  • Display – LCD showing the temperature and selected mode
  • Power supply – 5 V 2 A from a mains adaptor or power bank
  • Pen dimensions – 18.4 x 3.1 x 4.1 cm
  • Pen weight – 60 g
  • Automatic sleep mode – after 90 seconds of inactivity
  • Package contents – 3D pen, 5 V 2 A mains adaptor, power cable, one spool of printing filament and instructions

The pen is ideal for small figures and models, decorations, school and art projects, as well as quickly joining or repairing plastic parts. Work on a heat-resistant surface and allow your finished drawing to cool for a while before handling it. When changing material, first retract the filament, then insert the new one. Remove any plastic residue from the tip only once it has cooled, and store the pen in a dry place.

The 3D printing pen is a practical introduction to 3D creation without a printer or computer. Combining 5 V 2 A power, a wide heating range and eight speeds, it is a tool that grows with its user: children can draw simple outlines, while more experienced creators can build complex models from several layers. One spool of filament is included, so you can try your first drawing as soon as you unpack it. You can then buy additional material according to the properties you want in the finished result.

Price incl. VAT €63.71