Home page Home page Hobbies & Garden Creative crafting and DIY kits EVA foam and craft materials 3D Pen with OLED Display Temperature 170 to 235 °C Three Feed Speeds 0.7 mm Ceramic Tip For 1.75 mm PLA and ABS Filament
3D Pen with OLED Display Temperature 170 to 235 °C Three Feed Speeds 0.7 mm Ceramic Tip For 1.75 mm PLA and ABS Filament

3D Pen with OLED Display Temperature 170 to 235 °C Three Feed Speeds 0.7 mm Ceramic Tip For 1.75 mm PLA and ABS Filament

A slim 3D drawing pen with precise temperature control and smooth filament feed. Suitable for creators aged eight and over as well as advanced model makers. Full description
In stock
Colour:
€58.03
Price incl. VATImport charges will apply
Safe shopping Safe shopping
Overview
3D Pen with OLED Display Temperature 170 to 235 °C Three Feed Speeds 0.7 mm Ceramic Tip For 1.75 mm PLA and ABS Filament

A 3D pen turns an ordinary drawing into a three-dimensional object you can hold in your hand. The melted filament flows smoothly from the nozzle and hardens within a few seconds, creating a solid line that you can continue building on. The clear OLED display shows the selected material and current temperature, so you know when the pen is ready to use. The 170 to 235 °C range covers softer PLA and harder ABS filaments, and you can adjust the temperature in small increments directly on the pen. The result is a steady flow of material without drips or breaks mid-stroke.

The pen's slim, well-balanced body feels much like an ordinary pencil in your hand, and at just 42 g, it will not tire your hand, even during longer drawing sessions. Its subtly matt finish helps prevent it from slipping through your fingers. Filament feed is switched between three speeds using a single button: the slow speed is ideal for details and outlines, while the fast speed is suited to filling in areas and building larger models. The pen works with 1.75 mm diameter filament, which you insert through the opening at the back and retract using the same button when you have finished drawing. The upper part of the body can be removed, making it easy to clean the inside and remove any leftover material without dismantling the entire pen.

  • Display – OLED showing the selected material and temperature
  • Temperature range – 170 to 235 °C for PLA and ABS filaments
  • Feed speed – three settings switched using a single button
  • Tip – ceramic nozzle approximately 0.7 mm in diameter
  • Compatible filament – PLA ABS and PETG with a diameter of 1.75 mm
  • Pen dimensions – 162 x 20 x 17.5 mm
  • Weight – 42 g
  • Power supply – via USB-C cable from a 5 V / 2 A power source or power bank
  • Design – removable upper body for cleaning the inside
  • Recommended age – 8 years and over
  • Package contents – 3D pen, PLA filament in three colours with a total length of 9 m, pattern catalogue, USB-C cable, instructions and cardboard box

Power is supplied via the included USB-C cable, which you can connect to a 5 V / 2 A power source or a power bank, so you can draw at a table even without a nearby socket. The pen switches itself off after five minutes of inactivity and retracts the material, helping to save filament between strokes. Before drawing, allow the pen to heat up until the display confirms that it has reached the set temperature, and insert the filament with its end cut straight. When you have finished, retract the material to prevent it from hardening in the nozzle. Wipe the pen with a dry cloth and do not immerse it in water, as it contains electronic components.

3D drawing is fun for children aged 8 and over as well as adults who want to make a small decoration or a building model, or repair a cracked plastic part. The 0.7 mm ceramic tip produces fine lines, making it suitable for delicate details such as lettering or animal outlines. The pen is ideal for drawing from a paper template as well as freehand in the air, creating structures from individual strokes. The pack of filament in three colours is enough for your first creations, and you can easily replenish your supply with additional 1.75 mm filament.

Price incl. VAT €58.03