Home page Home page Hobbies & Garden Creative crafting and DIY kits EVA foam and craft materials 3D Pen with OLED Display Operating Temperature 130 to 230 °C Ceramic Nozzle 0.6 mm PLA and ABS Filament 1.75 mm Body 17.5 cm
3D Pen with OLED Display Operating Temperature 130 to 230 °C Ceramic Nozzle 0.6 mm PLA and ABS Filament 1.75 mm Body 17.5 cm

3D Pen with OLED Display Operating Temperature 130 to 230 °C Ceramic Nozzle 0.6 mm PLA and ABS Filament 1.75 mm Body 17.5 cm

Draw directly in the air with melted filament. Keep an eye on the temperature and feed speed on the display, and power up the pen using either the adapter or a standard power bank. Full description
In stock
Colour:
€106.51
Price incl. VATImport charges will apply
Safe shopping Safe shopping
Overview
3D Pen with OLED Display Operating Temperature 130 to 230 °C Ceramic Nozzle 0.6 mm PLA and ABS Filament 1.75 mm Body 17.5 cm

The 3D printing pen turns melted filament into a line that holds its shape even in the air, allowing your drawing to rise from the paper into three dimensions. The body measures 17.5 x 1.7 x 2 cm and weighs just 45 g, so it feels much like a chunky marker and your hand is less likely to tire during longer drawing sessions. The OLED display keeps the set temperature and selected mode in view at all times, so you can tell when the tip is ready for the first stroke. The operating temperature ranges from 130 to 230 °C and can be adjusted to suit how quickly the filament you are using melts. The feed speed is smoothly adjustable, so you can draw fine outlines slowly and fill in larger areas more quickly.

The pen works with PLA and ABS filament with a diameter of 1.75 mm, which you insert into the opening at the end of the body before pressing the button to start feeding it through. Press the second button to automatically retract the filament, making material changes take just a few seconds without any need to prise anything open or dismantle the pen. The material is melted by a 0.6 mm ceramic nozzle, which withstands high temperatures and allows the filament to flow evenly. Power is supplied by the included mains adapter, which accepts 100 to 240 V, but the pen also works just as well with a power bank, so you can take it away from your desk and use it anywhere.

  • Type – pen for 3D drawing with melted filament
  • Display – OLED showing the temperature and selected mode
  • Operating temperature – 130 to 230 °C, depending on the material used
  • Nozzle – ceramic, 0.6 mm in diameter
  • Filament – PLA and ABS, 1.75 mm in diameter
  • Filament feed – smoothly adjustable speed and automatic retraction
  • Power supply – 5 V 2 A from the included adapter or a power bank
  • Maximum power consumption – 10 W
  • Pen dimensions – 17.5 x 1.7 x 2 cm
  • Weight – 45 g
  • Package contents – 3D pen, 3 sample filaments, user manual, power cable and mains adapter

Learn to use the pen step by step and create your first results in just a few minutes. Start by drawing flat pieces on a work surface, let them harden, then join them with another stroke to create a 3D model of a house, an animal or the framework of a larger structure. It is worth starting with a slow feed speed and a lower temperature, then gradually increasing both until the filament flows as required. Once you have finished drawing, retract the material and disconnect the pen from the power supply. The tip heats up during use, so do not touch it, and ensure a child is supervised by an adult until they can adjust the feed speed and temperature themselves.

3D drawing is fun for children and adults alike, and the pen comes with everything you need, including filament for your first attempts. Its slim body and light weight make it easy to slip into a pencil case or rucksack, and comfortable to hold all afternoon. The 5 V 2 A power supply works with a standard adapter or power bank, so you can create at your desk, at a holiday cottage or while travelling. The temperature reading on the display, together with the smoothly adjustable feed speed, lets you control how much material flows from the nozzle, helping your drawing look neat after just a few strokes. You can later replenish the filament in any colour and length, as the pen accepts standard 1.75 mm filament.

Price incl. VAT €106.51