Home page Home page Hobbies & Garden Creative crafting and DIY kits EVA foam and craft materials 3D Pen with LCD Display Set of 90 m PLA Filament in 30 Colours 0.7 mm Nozzle Metal Motor Case Creative Crafting
3D Pen with LCD Display Set of 90 m PLA Filament in 30 Colours 0.7 mm Nozzle Metal Motor Case Creative Crafting

3D Pen with LCD Display Set of 90 m PLA Filament in 30 Colours 0.7 mm Nozzle Metal Motor Case Creative Crafting

Three-dimensional pictures take shape in the air or by following a template. Thirty shades of filament are enough to create a whole gallery of models and gifts for friends. Full description
In stock
Colour:
€64.59
Price incl. VATImport charges will apply
Safe shopping Safe shopping
Overview
3D Pen with LCD Display Set of 90 m PLA Filament in 30 Colours 0.7 mm Nozzle Metal Motor Case Creative Crafting

With a 3D pen, you can draw not only on paper but also in mid-air, so a flat drawing can quickly grow into a model you can hold in your hand. The pack includes 90 m of PLA filament in 30 colours, with three metres of material in each shade, so you can switch colours without having to be sparing. The melted material emerges from a 0.7 mm nozzle, hardens in moments and holds vertical shapes. The pen body narrows at the grip, making it feel much like a thicker marker. Children and adults can get the hang of using it after just a few minutes of practice.

The extrusion speed can be set to one of three levels, so detailed lines can be drawn slowly while larger areas are filled more quickly. The pen is compatible with 1.75 mm diameter PLA filament and, when switched to the appropriate mode, can also use ABS material. A motor with metal gears feeds the filament, reducing noise and maintaining an even flow. If the pen is left unused for three minutes, it goes into sleep mode automatically and wakes up when a button is briefly pressed.

  • Display – LCD for checking the selected mode
  • Nozzle – 0.7 mm diameter
  • Filament – PLA, 1.75 mm diameter
  • Feed settings – three speed levels
  • Supported materials – PLA and ABS
  • Drive – motor with metal gears
  • Power supply – 5 V 2 A adapter with EU plug and USB-C cable
  • Automatic sleep mode – after 3 minutes of inactivity
  • Pack contents – 3D pen, travel case, 5 V 2 A power adapter, USB-C cable, 90 m of PLA filament in 30 colours, pen stand, finger protectors, tracing templates and instructions

Before drawing, connect the pen to the adapter and wait for it to heat up, as indicated by the light. Then insert the end of the filament into the opening at the back and press the button to start feeding it. Changing colours takes just a moment, as the remaining material can be retracted at the press of a button. Rest the pen in its stand between drawings to keep the hot nozzle away from the table. Once it has cooled, store it in the case along with the filament reels. The hard case holds its shape, so the reels will not unwind, even when carrying it to Grandma’s or on a day out.

The wide range of shades opens up possibilities for colourful models that would not be possible with just one or two colours, from flowers and animals to little houses and jewellery. Crafting is fun for adults as well as children, as working carefully with lines develops dexterity and imagination, and the results are visible straight away. The templates in the pack help with the first attempts; creators can invent their own shapes after that. When the filament runs out, replace it with standard 1.75 mm diameter filament.

Price incl. VAT €64.59