Home page Home page Hobbies & Garden Creative crafting and DIY kits EVA foam and craft materials 3D Pen with LCD Display Set 150 m PLA Filament in 30 Colours 0.7 mm Nozzle USB-C Power Travel Case Crafting
3D Pen with LCD Display Set 150 m PLA Filament in 30 Colours 0.7 mm Nozzle USB-C Power Travel Case Crafting

3D Pen with LCD Display Set 150 m PLA Filament in 30 Colours 0.7 mm Nozzle USB-C Power Travel Case Crafting

A supply of filament for long, uninterrupted creative sessions. The pen maintains a smooth line, works quietly and, once you have finished drawing, it and the spools all fit into the sturdy travel case. Full description
In stock
Colour:
€78.56
Price incl. VATImport charges will apply
Safe shopping Safe shopping
Overview
3D Pen with LCD Display Set 150 m PLA Filament in 30 Colours 0.7 mm Nozzle USB-C Power Travel Case Crafting

The 3D pen extrudes melted filament, which solidifies in an instant, turning a stroke of your hand into a solid line and that line into a whole model. The set includes 150 m of PLA filament in 30 colours, with each shade wound onto a five-metre spool. A 0.7 mm nozzle ensures a smooth flow, creating fine, clean outlines. The pen is powered via a USB-C connector, so the cable stays firmly connected and can be routed across the table without getting in the way. The control buttons are on the side and can be pressed with your thumb while holding the pen normally.

Three feed speeds let you switch between slowly tracing a template and quickly filling larger areas. The pen is designed for 1.75 mm diameter filament and, in addition to PLA, can also use ABS when you switch modes. Inside, a motor with metal gears maintains constant pressure on the filament and runs quietly. After three minutes of inactivity, the pen goes into sleep mode automatically, saving energy between drawings.

  • Display – LCD showing the settings
  • Nozzle – 0.7 mm diameter
  • Filament – PLA, 1.75 mm diameter
  • Feed – three speed settings
  • Materials – PLA and ABS, depending on the selected mode
  • Motor – metal gears for smooth operation
  • Power – USB-C cable and 5 V 2 A power adapter with EU plug
  • Energy-saving mode – after 3 minutes of inactivity
  • Package contents – 3D pen, travel case, 5 V 2 A power adapter, USB-C cable, 150 m of PLA filament in 30 colours, pen stand, finger protectors, tracing templates and instructions

The process is always the same: connect the adapter, select a mode, wait for the pen to heat up and insert the end of the filament into the opening. To change colour, retract the material at the touch of a button and replace it with a new spool. After drawing, place the hot pen in the stand until the nozzle has cooled. The case holds the pen, adapter, cable and all the spools, so nothing gets lost and you can take the set with you to a holiday cottage or to visit the grandparents. The spools stay wound in their compartment, and any leftover filament remains straight for the next use.

A large supply of material is useful wherever you create regularly, for example for school projects, building models or homemade gifts. You can gradually move from simple outlines to three-dimensional structures assembled from several parts. Working with the pen develops fine motor skills, judgement and patience, as each line requires a steady hand. You can later replenish the filament with any 1.75 mm diameter filament, so you can keep creating without needing to buy a new pen.

Price incl. VAT €78.56