Home page Home page Hobbies & Garden Creative crafting and DIY kits EVA foam and craft materials 3D Pen for Children with 50 m of PCL Filament in 10 Colours Low-Temperature Heating up to 40 °C 700 mAh Battery 1.75 mm Filament
3D Pen for Children with 50 m of PCL Filament in 10 Colours Low-Temperature Heating up to 40 °C 700 mAh Battery 1.75 mm Filament

3D Pen for Children with 50 m of PCL Filament in 10 Colours Low-Temperature Heating up to 40 °C 700 mAh Battery 1.75 mm Filament

A 3D drawing set with plenty of material for hours of creativity. The filament melts at a low temperature, sets quickly and the colours can be changed as desired. Full description
In stock
Colour:
€67.64
Price incl. VATImport charges will apply
Safe shopping Safe shopping
Overview
3D Pen for Children with 50 m of PCL Filament in 10 Colours Low-Temperature Heating up to 40 °C 700 mAh Battery 1.75 mm Filament

Anyone who wants to enjoy regular creative sessions with children will appreciate a set that includes a supply of material as well as the pen. This 3D pen heats the filament to just 40 °C, so children can safely hold the filament with their fingers and attach it to a model they are working on. The package also includes 50 m of filament in ten colours, enough to make dozens of animals, pieces of jewellery and small structures. The pen measures 15.5 x 3.9 cm and weighs 64 g, making it as comfortable to hold as a thicker felt-tip pen. There are just a few buttons, and children will quickly remember which one starts feeding and which one reverses it.

The pen is powered by a built-in 700 mAh battery, which recharges using the included USB cable and a 5 V, 2 A power supply. Charging takes around 80 minutes, and one charge lasts for approximately an hour of continuous use. The heating element has a power rating of 5 W, and the pen gives a voice alert when it is heated. The included stand keeps the pen's nozzle off the tabletop between strokes.

  • Type – low-temperature 3D pen for children with a supply of filament
  • Nozzle temperature – up to 40 °C
  • Filament material – PCL, 1.75 mm diameter
  • Filament included – 10 colours, 5 m each, 50 m in total
  • Pen dimensions – 15.5 x 3.9 cm
  • Weight – 64 g
  • Battery – built-in, 700 mAh
  • Charging – via USB cable using a 5 V, 2 A power supply, approximately 80 minutes
  • Runtime per charge – approximately 60 minutes
  • Heating power – 5 W
  • Controls – filament insertion, start and pause, reverse and two feed speeds
  • Package contents – 3D pen, stand, USB charging cable, 10 colours of PCL filament, 5 m each, 5 m of test PCL filament, scissors, nozzle cleaning needle, finger protectors, instructions and gift box

The process is always the same. Insert the end of the filament into the opening at the back of the pen, wait for the heated alert and press the feed button. The fine filament can be drawn across paper like a pencil or lifted into the air to build three-dimensional shapes. Join finished pieces by melting them together with another dab of material. When you have finished, it is best to retract the remaining filament and clean the nozzle opening with the included needle to prevent the material from clogging next time. You can change colours as desired: simply retract one filament and insert another.

3D drawing is fun for children and adults alike, while also developing fine motor skills, concentration and spatial awareness. The generous supply of material means the fun does not have to end after the first afternoon, and the set will last for siblings to enjoy together. Thanks to the 1.75 mm filament diameter, commonly available low-temperature refills can be purchased. With a runtime of around 60 minutes per charge, the pen does not need to stay plugged in. The set makes an ideal birthday present or holiday activity.

Price incl. VAT €67.64