Home page Home page Home & Household Supplies Kitchen Cooking Kitchen Knives & Scissors Knife Sharpeners & Steels 320 Grit Diamond Sharpening Stone 160 x 20 x 9 mm Medium-Coarse Knife Sharpening Stone Replacement Stone for Ruixin Pro Sharpener Edge Alignment
320 Grit Diamond Sharpening Stone 160 x 20 x 9 mm Medium-Coarse Knife Sharpening Stone Replacement Stone for Ruixin Pro Sharpener Edge Alignment

320 Grit Diamond Sharpening Stone 160 x 20 x 9 mm Medium-Coarse Knife Sharpening Stone Replacement Stone for Ruixin Pro Sharpener Edge Alignment

Medium-coarse 320 grit diamond stone for aligning the edge after coarse sharpening. Fits the Ruixin Pro sharpener and can also be used on its own on a worktop. Full description
In stock
€12.18
Price incl. VATImport charges will apply
Safe shopping Safe shopping
Overview
320 Grit Diamond Sharpening Stone 160 x 20 x 9 mm Medium-Coarse Knife Sharpening Stone Replacement Stone for Ruixin Pro Sharpener Edge Alignment

The diamond sharpening stone with a grit of 320 grit follows on from coarse stones and helps even out the blade edge. The medium-coarse diamond layer removes scratches left by coarser sharpening and prepares the edge for finer steps. The stone measures 160 x 20 x 9 mm and is designed for the Ruixin Pro sharpening system. It is also suitable for knives that are blunt but do not have a seriously damaged edge. You can continue with finer stones afterwards.

At 320 grit, this stone sits between coarse and medium stones, making it a practical intermediate step when sharpening. After using it, we recommend refining the edge with 600 and 1000 grit stones and, if needed, finishing it with a finer grit. The diamond surface is firmly bonded to the backing, which keeps the stone flat and makes it easy to secure in the sharpener's holder. The grit is marked on the stone, so you can quickly find it among your other stones.

The stone can also be used on its own without a sharpener. Simply place it on a damp cloth or rubber mat to prevent it from slipping while sharpening, and guide the blade in even strokes at the same angle. The diamond layer does not need prolonged soaking, so you can start sharpening almost straight away. Its narrow, elongated shape is suitable for kitchen knives and smaller blades. The entire top side of the stone is covered with a diamond layer, so you can use the full length and width of the sharpening surface.

  • Type – diamond knife sharpening stone
  • Grit – medium-coarse, 320 grit
  • Dimensions – 160 x 20 x 9 mm
  • Sharpening surface – diamond layer on a solid backing
  • Compatibility – Ruixin Pro sharpening system
  • Use without a sharpener – place on a damp cloth or rubber mat
  • Suitable for – aligning the edge after coarse sharpening and sharpening blunt knives
  • Package contents – 1 x 320 grit diamond sharpening stone

The stone is suitable for chef's knives, bread knives with a straight edge, pocket and outdoor knives, as well as workshop tools. Use light pressure and check the edge regularly to avoid removing unnecessary material. Rinse the stone with water after use and leave it to air dry. When using it in the Ruixin Pro sharpener, set the sharpening angle first and secure the knife firmly. Store the stone dry and protect its diamond surface from impacts.

The 320 grit diamond stone is suitable for anyone who wants to move smoothly from coarse sharpening to a finer finish. It fits the Ruixin Pro sharpener and is also useful for hand sharpening on a worktop. The medium-coarse grit evens out the edge and prepares it for the next steps. Its 160 mm length provides plenty of surface area for longer blades, too. It is a useful intermediate step that complements coarse and fine stones at home or in the workshop.

Price incl. VAT €12.18