LUNZO s.r.o. (Czechia) · info@lunzo.ie · +420 603 337 330 · Mon–Sun 8:00–17:00 Irish time · support in English · Contact Us

Home page Home page Hobbies & Garden Solar equipment Solar accessories 3 m Extension Cable with Solar Connector Photovoltaic Cable 16 AWG with 1.5 mm² Cross Section Free End Red and Black For Panels
3 m Extension Cable with Solar Connector Photovoltaic Cable 16 AWG with 1.5 mm² Cross Section Free End Red and Black For Panels

3 m Extension Cable with Solar Connector Photovoltaic Cable 16 AWG with 1.5 mm² Cross Section Free End Red and Black For Panels

Set of two wires with a ready-made connector on one side and a free end on the other. Wire cross-section 1.5 mm² and colour coding of red and black insulation. Full description
In stock
€27.03
Safe shopping Safe shopping
Overview
3 m Extension Cable with Solar Connector Photovoltaic Cable 16 AWG with 1.5 mm² Free End Red and Black For Panels

The 3 m photovoltaic extension cable is used to connect a solar panel to a charge controller, inverter, or other wiring in the system. It is supplied as a pair of wires in red and black design, so the polarity is distinguished by the colour of the insulation, making it easy to connect without confusion. The wire has a cross-section of 1.5 mm² according to the designation 16 AWG, which corresponds to common domestic and mobile photovoltaic installations. One end is fitted with a solar connector from the factory, while the other end remains free for connection to a terminal block or for custom termination. The stranded core provides the cable with the flexibility needed for routing around the supporting structure.

  • Length 3 m — reach to a panel located on the roof of a shelter or on a distant structure
  • Cross-section 1.5 mm² — wire corresponding to the designation 16 AWG
  • Solar connector on one end — snap-fit connection with pull-out prevention
  • Free end on the other side — terminate according to the connected device
  • Stranded core — the cable bends well and routes even in tighter spaces
  • Red and black insulation — colour coding for positive and negative wires
  • Pair of cables in the package — one piece carries positive, the other negative
  • Design for photovoltaics — cable designed for DC wiring of solar systems

Package contents:

  • 1x cable with red insulation and solar connector
  • 1x cable with black insulation and solar connector

The cables are suitable for connecting a panel to a charge controller, extending existing wiring, or replacing a damaged piece in a functional assembly. The free end allows for custom termination — a ferrule, cable lug, or direct connection to a terminal. Three metres in length covers cases where the panel is located in the garden and the controller is inside a shed or caravan. When designing the wiring, keep in mind that voltage drop increases with the length of the run, so choose the shortest reasonable distance. The colour coding of the insulation facilitates polarity checking during any future modifications to the assembly.

Delivery and Returns
Price incl. VAT €27.03