Home page Home page Auto & Moto Car Spare Parts Car body parts 25-Tooth Gear Wheel for Mirror Folding Motor Length 21.5 mm Metal Pinion and 3 mm Pin for Hyundai Santa Fe i20 i30 and Kia K3 K5
25-Tooth Gear Wheel for Mirror Folding Motor Length 21.5 mm Metal Pinion and 3 mm Pin for Hyundai Santa Fe i20 i30 and Kia K3 K5

25-Tooth Gear Wheel for Mirror Folding Motor Length 21.5 mm Metal Pinion and 3 mm Pin for Hyundai Santa Fe i20 i30 and Kia K3 K5

Replacement gear wheel for electric folding side mirrors. Repairs the FC260SD14270 motor and restores smooth mirror folding without costly replacement. Full description
In stock
€17.86
Price incl. VATImport charges will apply
Safe shopping Safe shopping
Overview
25-Tooth Gear Wheel for Mirror Folding Motor Length 21.5 mm Metal Pinion and 3 mm Pin for Hyundai Santa Fe i20 i30 and Kia K3 K5

The 25-tooth gear wheel is a replacement part for the motor that electrically folds the side mirror. If the mirror sticks, clicks or does not move when folding, the cause is often a worn or cracked gear wheel. Replacing this small part can repair the motor, so you do not need to buy a whole new mechanism or complete mirror. The gear wheel is intended for Hyundai Santa Fe, i20 and i30 vehicles, as well as Kia K3 and K5 models. It is suitable for DIY enthusiasts and garages that repair mirror folding mechanisms.

The part consists of a white 25-tooth gear wheel fitted onto a metal pinion with helical teeth. The total length of the part is 21.5 mm, and there are 3 mm diameter pins at both ends, which locate the gear wheel in the motor housing. The pinion has a diameter of 8.5 mm. According to the seller's listing, the part is intended for a motor marked FC260SD14270. Before ordering, we recommend comparing the original gear wheel from your motor with the dimensions and photographs to ensure the part is an exact match.

  • Part type – mirror folding motor gear wheel
  • Number of teeth – 25 teeth on the white gear wheel
  • Pinion – metal, with helical teeth and a diameter of 8.5 mm
  • Total length – 21.5 mm
  • Pin diameter – 3 mm at both ends
  • Material – metal
  • Motor – FC260SD14270
  • Compatibility – Hyundai Santa Fe i20 i30 and Kia K3 K5
  • Use – repair of electric side mirror folding
  • Package contents – 1 25-tooth gear wheel

To replace the part, remove the mirror glass and cover, take out the folding motor and carefully dismantle it. Remove the damaged gear wheel and fit the new one in the same position, ensuring that the pins sit properly in the housing bearings. Before reassembly, you can lightly lubricate the gears with a suitable plastic-compatible grease. Then reassemble the motor and test the mirror folding in both directions. A skilled car owner can carry out the work using ordinary tools; otherwise, a garage can do it. When dismantling the motor, note how the gear components are positioned so that everything can be reassembled in the same order.

The replacement 25-tooth gear wheel is an inexpensive way to restore the function of an electrically folding mirror without buying a complete motor. The part, with a total length of 21.5 mm and 3 mm diameter pins, is suitable for motors used in the Hyundai and Kia vehicles listed above. The metal pinion, with a diameter of 8.5 mm, engages with the other parts of the motor's gear train. Before buying, check the motor type and compare the dimensions with the original part. The package contains one gear wheel, ready to fit, so you can complete the repair in a short time.

Price incl. VAT €17.86