Home page Home page PC & Laptop Accessories Other Electronics 2.13-inch E-paper Display HAT 250 x 122 Black and White E-ink SPI Module Low Power For Raspberry Pi Arduino STM32 and Jetson Nano
2.13-inch E-paper Display HAT 250 x 122 Black and White E-ink SPI Module Low Power For Raspberry Pi Arduino STM32 and Jetson Nano

2.13-inch E-paper Display HAT 250 x 122 Black and White E-ink SPI Module Low Power For Raspberry Pi Arduino STM32 and Jetson Nano

A low-power black-and-white electronic ink display that retains its image even without power. Ideal for information panels and Raspberry Pi projects. Full description
In stock
€45.81
Price incl. VATImport charges will apply
Safe shopping Safe shopping
Overview
2.13-inch E-paper Display HAT 250 x 122 Black and White E-ink SPI Module Low Power For Raspberry Pi Arduino STM32 and Jetson Nano

This black-and-white e-paper display with a 2.13-inch diagonal is a ready-to-use HAT-format module that fits directly onto the Raspberry Pi GPIO header. The display has a resolution of 250 x 122 pixels and uses electronic ink technology, so the image remains visible even after the power is disconnected. Text and simple graphics are easy to read even in direct sunlight, as the display has no built-in backlight and reflects ambient light in much the same way as paper. The module communicates via the SPI interface, so as well as the Raspberry Pi, it can also be connected to Arduino, STM32 or Jetson Nano boards. It is suitable for home projects, electronics education and small information panels.

The display area measures 48.55 x 23.71 mm, and the entire display measures 65 x 30.2 mm. A pixel pitch of 0.194 x 0.194 mm ensures sharp text and clean lines. The display works with two levels, black and white, and a full screen refresh takes approximately 2 seconds. Power consumption during refresh is typically 26.4 mW and drops below 0.017 mW in standby, making the module suitable for battery-powered devices too. The viewing angle exceeds 170°, so the content can be read from the side as well. The control board is fitted with a voltage level shifter and a connector for the connecting cable.

  • Type – e-paper (E-ink) display in HAT format with control board
  • Diagonal – 2.13 inches
  • Resolution – 250 x 122 pixels
  • Display colours – black and white
  • Interface – SPI
  • Display area – 48.55 x 23.71 mm
  • Display dimensions – 65 x 30.2 mm
  • Pixel pitch – 0.194 x 0.194 mm
  • Full refresh time – approximately 2 s
  • Power consumption during refresh – 26.4 mW
  • Standby power consumption – less than 0.017 mW
  • Viewing angle – more than 170°
  • Compatibility – Raspberry Pi, Arduino, STM32 and Jetson Nano
  • Package contents – e-paper display with HAT control board, connecting cable, 2 spacers, 2 screws and 2 nuts

Fit the module onto the GPIO header of a switched-off Raspberry Pi and secure it with the spacers, or connect it to another board using the supplied cable. The Raspberry Pi and other control boards are not included. The image on the e-paper display changes only when refreshed, so it is not suitable for video, but is ideal for displaying the temperature, time, server status, price labels or name badges. Protect the display surface from pressure and sharp objects, and clean it only with a dry, soft cloth.

This module combines low power consumption with excellent readability and is suitable wherever the screen content changes only occasionally. Thanks to the SPI interface, it is easy to control using common development boards and libraries. Its compact dimensions make it easy to fit into the enclosure of a small device, or it can be left directly on the Raspberry Pi. The high-contrast black-and-white display is readable from different angles and requires no backlight. It is a practical choice for hobbyists, students and developers building low-power information displays.

Price incl. VAT €45.81