LUNZO s.r.o. (Czechia) · info@lunzo.ie · +420 603 337 330 · Mon–Sun 8:00–17:00 Irish time · support in English · Contact Us

Home page Home page Hobbies & Garden Solar equipment Solar accessories 12 V Solar Water Pump with Brushed Motor Power 180 W Lift 15 m Internal Diameter of Nozzles 25 mm
12 V Solar Water Pump with Brushed Motor Power 180 W Lift 15 m Internal Diameter of Nozzles 25 mm

12 V Solar Water Pump with Brushed Motor Power 180 W Lift 15 m Internal Diameter of Nozzles 25 mm

Powered by a battery or solar panel, does not include a 220 V plug. The 180 W motor can pump water up to fifteen metres, and the outlets have a diameter of 25 mm. Full description
In stock
€96.90
Safe shopping Safe shopping
Overview
12 V Solar Water Pump with Brushed Motor Power 180 W Lift 15 m Internal Diameter of Outlets 25 mm Dimensions 242 x 150 x 115 mm Turquoise

The water pump is designed for direct current supply of 12 V, meaning it operates from a battery or a solar panel. The brushed motor has a power of 180 W and the lift height reaches 15 m, making the pump suitable for garden irrigation, sprinklers, and transferring water between tanks. Both the suction and discharge outlets have an internal diameter of 25 mm and an external diameter of 42 mm, allowing for a hose connector or an adapter for piping to be screwed on. The turquoise body measures 242 x 150 x 115 mm and stands on a low base with holes for securing it to a solid surface. The power cable runs from the enclosure with the terminal block through a grommet that holds it in place. The arrangement with a separate cover for the electrical installation facilitates connecting the wires to the correct polarity.

  • Power Supply 12 V — current is drawn directly from the battery or solar setup, connection to the 220 V mains is expressly prohibited by the manufacturer.
  • Power 180 W — brushed motor with sufficient power for sprinklers and longer hose runs, while consumption depends on the voltage of the source.
  • Lift Height 15 m — water can be elevated to a higher level, on a slope, or into a raised tank, although the amount delivered decreases with increasing elevation.
  • Outlets 25 mm — internal diameter of 25 mm and external diameter of 42 mm for both suction and discharge, connection is threaded and can be sealed with tape.
  • Dimensions 242 x 150 x 115 mm — compact body that fits into a utility room, next to a well, or beside a tank with grey water.
  • Mounting Base — holes in the base allow the pump to be securely fastened to the surface, preventing movement during operation and loosening of connections.

Package Contents:

  • 1x 12 V solar water pump

Before connecting, polarity must be checked, as the positive and negative wires connect directly to the terminals of the battery or the output of the solar regulator. The source must remain direct current, as 220 V mains voltage would damage the pump, which the manufacturer also warns against. Securely fastening it to the surface reduces vibrations and preserves hose connections, which would otherwise loosen and start to leak over time. The threaded outlets with an internal diameter of 25 mm fit standard garden accessories, allowing the circuit to be assembled from available parts. The turquoise body with a height of 150 mm and a length of 242 mm also fits on narrower shelves or in a box with solar equipment. Thus, the pump complements an off-grid setup with a panel and battery, where a mains socket is not available.

Delivery and Returns
Price incl. VAT €96.90