LUNZO s.r.o. (Czechia) · info@lunzo.ie · +420 603 337 330 · Mon–Sun 8:00–17:00 Irish time · Contact Us

Home page Home page Hobbies & Garden Pumps Diaphragm and spray pumps 12 V Electric Diaphragm Pump with 130 PSI Pressure and 70 W Power, Flow Rate of 6 L per Minute and 6 A Draw in Black for Spraying
12 V Electric Diaphragm Pump with 130 PSI Pressure and 70 W Power, Flow Rate of 6 L per Minute and 6 A Draw in Black for Spraying

12 V Electric Diaphragm Pump with 130 PSI Pressure and 70 W Power, Flow Rate of 6 L per Minute and 6 A Draw in Black for Spraying

One hundred and thirty PSI compresses water into a fine mist even at the end of the hose. Four feet with holes keep the body in place and the ports are tightened via external threads. Full description
In stock
€56.72
Safe shopping Safe shopping
Overview
12 V Electric Diaphragm Pump with 130 PSI Pressure and 70 W Power, Flow Rate of 6 L per Minute and 6 A Draw in Black for Spraying

For a sprayer, washing gun, or water distribution in a caravan, a pump is needed that maintains pressure even with low water flow. This diaphragm pump operates on 12 V and generates a pressure of 130 PSI, which is 0.9 MPa or 9 bar. The maximum power consumption is 70 W and during operation, the pump draws 6 A from the source. The flow rate reaches 6 litres per minute, which is approximately 360 litres of water per hour of continuous operation. The body is black, with two threaded ports at the head featuring red seals, and on the sides, there are four feet with holes for screws.

Key Features:

  • Pressure 130 PSI — equivalent to 0.9 MPa and maintains a fine mist even at the end of a longer hose
  • Set Pressure 0.9 MPa — the label indicates this value as the working setting
  • Maximum Power 70 W — value specified for a twelve-volt direct current motor
  • Flow Rate 6 L per Minute — approximately 360 litres of water per hour of pump operation
  • Current Draw 6 A — operating current indicated on the pump label according to the manufacturer
  • Power Supply Range 9 to 14.4 V — the pump operates even with fluctuating battery voltage
  • Single Diaphragm Head — the pumping part consists of a single chamber above the pump motor body
  • Threaded Ports — both inlet and outlet are equipped with threads and red sealing rings
  • Ports on the Sides of the Head — inlet and outlet point to opposite sides of the pump
  • Four Mounting Feet — plastic feet with holes are a fixed part of the pump body
  • Power Leads — red and black wires with stripped ends for connection to the source
  • Cooling Fins — longitudinal fins around the entire casing of the pump motor
  • 12 V Operation — the pump does not require mains voltage or a separate transformer
  • Suitable for Spraying — ideal for agricultural spraying and for transferring water
  • Compact Assembly — the motor with the head forms one piece without an external control unit
  • Black Finish — the entire casing of the motor and the pumping head are in black

Contents of the Package:

  • 1x electric diaphragm pump

The assembly targets operations without a socket, where the only power source is a car battery or inverter. The pressure of 130 PSI determines how far and how finely the nozzle sprays, making it the key specification of the entire assembly. Four mounting feet with holes are a fixed part of the body, so no additional bracket is needed. The flow rate of 6 L per minute and power consumption of 70 W keeps the usage at a level manageable by even a smaller battery. After attaching the hoses and connecting the two wires to the source, the pump is ready for immediate operation in the field.

Price incl. VAT €56.72