Home page Home page Hobbies & Garden Tools Hand Tools Broken Screw Extractors 1100 W Induction Bolt Heater Handheld with Rotating Pistol-Shaped Body Set with 8 Coils Flame-Free Heating of Rusty Nuts and Bearings
1100 W Induction Bolt Heater Handheld with Rotating Pistol-Shaped Body Set with 8 Coils Flame-Free Heating of Rusty Nuts and Bearings

1100 W Induction Bolt Heater Handheld with Rotating Pistol-Shaped Body Set with 8 Coils Flame-Free Heating of Rusty Nuts and Bearings

The 1100 W handheld induction heater with a rotating body loosens rusted bolts and nuts without an open flame. The coils are simply screwed in by hand. Full description
In stock
€371.14
Price incl. VATImport charges will apply
Safe shopping Safe shopping
Overview
1100 W Induction Bolt Heater Handheld with Rotating Pistol-Shaped Body Set with 8 Coils Flame-Free Heating of Rusty Nuts and Bearings

The handheld induction bolt heater is a practical assistant for the workshop or garage when you need to loosen a rusted joint without an open flame. It operates at 1100 W and heats the metal part using electromagnetic induction, so heat is generated directly in the material inside the coil. It is suitable for rusty bolts, nuts, gears, pulleys, bearings or sensors on cars and machinery. Thanks to the even heating, a seized joint is easier to loosen and the part can be turned using standard tools. The set includes 8 induction coils, so you can always choose a suitable size for the part.

The main advantage of this model is its rotating body. Use the swivel joint to change the heater from a straight configuration to a pistol shape, making it easier to reach areas with limited space, such as a car's engine compartment. The induction coil is fitted by screwing it in by hand, without a retaining nut, so changing coils is quick and requires no additional tools. The heater is switched on and off using the switch on the handle and does not require water cooling. As there is no open flame, there is no need to protect nearby plastics, fibres and similar materials as you would when working with a torch.

  • Type – handheld magnetic induction heater with rotating body
  • Model – KIA-1.1KW Plus Rotating Type
  • Power – 1100 W
  • Rated voltage – 110–220 V
  • Plug – EU
  • Diameter of bolts to be heated – 5 to 40 mm
  • Coils – 8 pcs, including 2 each of circular coils with diameters of 30, 40 and 50 mm
  • Coil fitting – screwed in by hand, without a retaining nut
  • Controls – ON/OFF switch on the handle
  • Configuration – straight or pistol-shaped, thanks to the swivel joint
  • Cooling – no water cooling
  • Use – rusty bolts, nuts, gears, pulleys, bearings and sensors on cars and machinery
  • Package contents – induction heater with power cable, 8 induction coils, cardboard box

Before heating, choose a coil that is as close as possible in diameter to the bolt or nut, and screw it into the heater head. Place the coil around the part, switch on the device and heat only until the joint loosens. After use, allow the coil and heated part to cool down, then store the heater in the box with the other coils to prevent them from being lost or damaged.

The 1100 W induction heater offers a fast way to loosen rusted joints without a torch or open flame. Its rotating body allows you to work in either a straight or pistol-shaped configuration, making the device useful in the workshop, garage or when carrying out repairs directly on machinery. The eight coils cover bolts and nuts with diameters of 5 to 40 mm. Changing a coil takes only a moment, and operation with a single switch is straightforward. It is a useful addition to your tools for extracting broken and seized bolts.

Price incl. VAT €371.14