Home page Home page Hobbies & Garden Tools Drills & Accessories Drill Bits 10 mm Countersink Drill Bit Set 7 pcs 2 to 4 mm HSS Pilot Drill 6.35 mm Hex Shank For Countersunk Wood and MDF Screws
10 mm Countersink Drill Bit Set 7 pcs 2 to 4 mm HSS Pilot Drill 6.35 mm Hex Shank For Countersunk Wood and MDF Screws

10 mm Countersink Drill Bit Set 7 pcs 2 to 4 mm HSS Pilot Drill 6.35 mm Hex Shank For Countersunk Wood and MDF Screws

Set of seven drill bits with a wider 10 mm countersink for larger screw heads. Pre-drilling and countersinking in one operation in wood and board materials. Full description
In stock
€58.03
Price incl. VATImport charges will apply
Safe shopping Safe shopping
Overview
10 mm Countersink Drill Bit Set 7 pcs 2 to 4 mm HSS Pilot Drill 6.35 mm Hex Shank For Countersunk Wood and MDF Screws

This set contains seven countersink drill bits that drill a hole for a screw and create a conical recess for its head in a single operation. The cutting heads have a larger diameter of 10 mm, making them suitable for screws with wider heads. The pilot drills have seven diameters ranging from 2 to 4 mm, so you can easily choose the size to match the screw diameter and the hardness of the wood. There is no need to switch between a drill bit and a separate countersink. The result is a neat joint in which the screw head does not protrude above the surface.

The high-speed steel (HSS) pilot drill has a spiral flute that carries sawdust out of the hole. The cutting head is made of tungsten steel and has ground cutting edges for a smooth cut without tearing the fibres. A locking screw secures the drill bit in the holder. The 6.35 mm hex shank fits a drill chuck as well as a magnetic or quick-release bit holder in a cordless screwdriver.

  • Type – countersink drill bit for wood
  • Pilot drill diameters – 2 mm, 2.5 mm, 2.8 mm, 3 mm, 3.2 mm, 3.5 mm and 4 mm
  • Countersink diameter – 10 mm for all bits
  • Drill bit material – high-speed steel (HSS)
  • Cutting head material – tungsten steel with ground cutting edges
  • Shank – 6.35 mm (1/4 inch) hex
  • Suitable materials – wood, MDF, plywood and chipboard
  • Compatible tools – handheld electric drill, cordless drill, pillar drill and row drill
  • Use – countersinking for countersunk screws or screws concealed below the surface
  • Package contents – 7 countersink drill bits with 10 mm countersinks and 2 mm, 2.5 mm, 2.8 mm, 3 mm, 3.2 mm, 3.5 mm and 4 mm pilot drills

When drilling, hold the tool perpendicular to the surface and use a medium speed to avoid scorching the wood around the hole. To recess the screw head further so that you can cover it with a wooden plug or filler, simply drill a little deeper. In hard wood, periodically withdraw the drill bit to clear the flute. Wipe the tools clean after use and store them in a dry place. Before drilling into a visible surface, it is advisable to test the countersink depth on an offcut of the same material.

The 10 mm countersink drill bit set is practical for furniture making, decking and cladding work, assembling wooden structures and everyday DIY tasks. The wider countersink accommodates larger screw heads, and the holes have a consistent appearance throughout the job. The seven pilot drill diameters cover most screws used in a home workshop. The 6.35 mm hex shank makes changing tools in a cordless drill quicker. The combination of an HSS drill bit and a cutting head made of tungsten steel ensures a clean, precise result.

Price incl. VAT €58.03