Home page Home page Hobbies & Garden Tools Drills & Accessories Drill Bits 10 mm Cobalt HSS M35 Step Drill Bit with Seven Steps Total Length 130 mm Cylindrical Shank For Steel and Stainless Steel
10 mm Cobalt HSS M35 Step Drill Bit with Seven Steps Total Length 130 mm Cylindrical Shank For Steel and Stainless Steel

10 mm Cobalt HSS M35 Step Drill Bit with Seven Steps Total Length 130 mm Cylindrical Shank For Steel and Stainless Steel

10 mm drill bit with a seven-step cobalt HSS M35 tip. Spiral length 86 mm and total length 130 mm for drilling into iron, steel, and stainless steel. Full description
In stock
€18.73
Price incl. VATImport charges will apply
Safe shopping Safe shopping
Overview
10 mm Cobalt HSS M35 Step Drill Bit with Seven Steps Total Length 130 mm Cylindrical Shank For Steel and Stainless Steel

The cobalt step drill bit with a diameter of 10 mm is a spiral drill designed for metal drilling. It is made from high-speed steel HSS M35 with cobalt, suitable for drilling iron, structural steel, and stainless steel. The tip of the drill features seven small steps that smoothly transition to the full diameter. The spiral groove removes chips from the hole during drilling. The 10 mm diameter is useful where a hole of nine and a half millimetres is insufficient.

The total length of the drill bit is 130 mm and the working part with the spiral measures 86 mm. The drill can handle sheets, strips, angles, and thicker metal profiles. The cylindrical shank fits into the chuck of cordless drills, handheld electric drills, and bench drills. Detailed images capture the step tip and the shape of the spiral groove.

Compared to a standard spiral drill, this bit features seven steps at the tip with gradually increasing diameters. The narrowest step creates a small hole in the metal, and the subsequent steps gradually enlarge it. The full diameter of 10 mm penetrates the material only after passing through all the steps. The hole is created in a single working step, eliminating the need for pre-drilling with a smaller bit. The traces of the individual steps in the wall of the hole are shown in the product photographs.

  • Type – step drill bit with a spiral tip
  • Diameter – 10 mm
  • Length of working part – 86 mm
  • Total length – 130 mm
  • Material – high-speed steel HSS M35 with cobalt content
  • Tip – seven steps gradually transitioning to full diameter
  • Shank – cylindrical
  • Usage – drilling into iron, steel, and stainless steel
  • Contents of package – 1 piece of 10 mm step drill bit

When working with steel and stainless steel, we recommend using cutting oil or coolant to protect the tip from overheating. Adjust the speed according to the diameter of the drill bit and the type of metal, and guide the drill perpendicular to the surface with even pressure. After use, clean the drill bit of chips and oil and store it so that the tip does not touch other metal tools. The drill bit is useful for assembling metal structures, holders, and brackets, for drilling holes for rivets and screws into sheets, or for repairing metal furniture and garden equipment. It is also suitable for modifying profiles and strips in a home workshop. Before starting to drill, mark the centre of the hole with a centre punch to prevent the tip from slipping on smooth metal.

The 10 mm step drill bit is a practical addition to any workshop or garage for metalworking. The high-speed steel M35 with cobalt drills even into stainless steel. The seven steps at the tip gradually enlarge the hole to the full diameter. The cylindrical shank fits standard drills. The package contains one drill bit with a diameter of 10 mm.

Price incl. VAT €18.73