LUNZO s.r.o. (Czechia) · info@lunzo.ie · +420 603 337 330 · Mon–Sun 8:00–17:00 Irish time · support in English · Contact Us

Home page Home page Hobbies & Garden Solar equipment Solar accessories 10 m Extension Cable with Solar Connector Photovoltaic Cable 16 AWG with a Cross Section of 1.5 mm² With Free End Red and Black For Panels
10 m Extension Cable with Solar Connector Photovoltaic Cable 16 AWG with a Cross Section of 1.5 mm² With Free End Red and Black For Panels

10 m Extension Cable with Solar Connector Photovoltaic Cable 16 AWG with a Cross Section of 1.5 mm² With Free End Red and Black For Panels

Set of two wires with a finished connector on one side and a free end on the other. Wire cross-section of 1.5 mm² and colour coding of red and black insulation. Full description
In stock
€65.90
Safe shopping Safe shopping
Overview
10 m Extension Cable with Solar Connector Photovoltaic Cable 16 AWG with a Cross Section of 1.5 mm² With Free End Red and Black For Panels

The 10 m photovoltaic extension cable is used to connect a solar panel to a charge controller, inverter, or other wiring in the system. It is supplied as a pair of wires in red and black design, so the polarity is distinguished by the colour of the insulation, preventing any mistakes during installation. The wire has a cross-section of 1.5 mm² according to the designation 16 AWG, which is suitable for common domestic and mobile photovoltaic installations. One end is factory-fitted with a solar connector, while the other end remains free for connection to a terminal block or for custom termination. The stranded core provides the cable with the flexibility needed when routing around the supporting structure.

  • Length 10 m — covers even longer distances between the panel and equipment located in another part of the building
  • Cross-section 1.5 mm² — wire corresponding to the designation 16 AWG
  • Solar connector on one end — snap connection with pull-out protection
  • Free end on the other side — terminate according to what the connected device requires
  • Stranded core — the cable bends well and routes even in tighter spaces
  • Red and black insulation — colour coding for positive and negative wires
  • Pair of cables in the package — one piece carries positive, the other negative
  • Design for photovoltaics — cable intended for DC wiring of solar systems

Contents of the package:

  • 1x cable with red insulation and solar connector
  • 1x cable with black insulation and solar connector

The cables are suitable for connecting the panel to a charge controller, extending existing wiring, or replacing a damaged piece in a functioning system. The free end allows for custom termination — spade, cable eye, or direct connection to a terminal. Ten metres in length covers the distance between the panel in the garden or on the roof and the controller located inside the building or caravan. When designing the wiring, keep in mind that voltage drop increases with the length of the run, so choose the shortest reasonable distance. The colour coding of the insulation facilitates polarity checking during any future adjustments to the system.

Delivery and Returns
Price incl. VAT €65.90