Menu Close
Empty basket
Your basket is currently empty.
Empty basket
0
Choose category
Home page Home page Hobbies & Garden Measuring Instruments Calipers Wireless Digital Internal Groove Caliper Shahe 5130L 15 to 300 mm Arms 60 mm Data Transfer to PC and Mobile for Large Holes
Wireless Digital Internal Groove Caliper Shahe 5130L 15 to 300 mm Arms 60 mm Data Transfer to PC and Mobile for Large Holes
Wireless Digital Internal Groove Caliper Shahe 5130L 15 to 300 mm Arms 60 mm Data Transfer to PC and Mobile for Large Holes 1
Wireless Digital Internal Groove Caliper Shahe 5130L 15 to 300 mm Arms 60 mm Data Transfer to PC and Mobile for Large Holes 1
Wireless Digital Internal Groove Caliper Shahe 5130L 15 to 300 mm Arms 60 mm Data Transfer to PC and Mobile for Large Holes 2
Wireless Digital Internal Groove Caliper Shahe 5130L 15 to 300 mm Arms 60 mm Data Transfer to PC and Mobile for Large Holes 3
Wireless Digital Internal Groove Caliper Shahe 5130L 15 to 300 mm Arms 60 mm Data Transfer to PC and Mobile for Large Holes 4
Wireless Digital Internal Groove Caliper Shahe 5130L 15 to 300 mm Arms 60 mm Data Transfer to PC and Mobile for Large Holes 5

Wireless Digital Internal Groove Caliper Shahe 5130L 15 to 300 mm Arms 60 mm Data Transfer to PC and Mobile for Large Holes

For grooves in large holes from 15 to 300 mm. Sends values wirelessly to a computer or mobile device, arms 60 mm, accuracy ±0.05 mm, and stainless steel scale. Full description
In stock
€229.21
Safe shopping Safe shopping
Overview
Wireless Digital Internal Groove Caliper Shahe 5130L 15 to 300 mm Arms 60 mm Data Transfer to PC and Mobile for Large Holes

The Shahe 5130L with a range of 300 mm is the longest wireless version of the digital caliper for internal grooves, indentations, and fittings in large holes and housings. It measures diameters in the range of 15 to 300 mm, making it suitable for large parts, flanges, and enclosures. The measured value is displayed on a large LCD screen with a resolution of 0.01 mm, and the caliper can send it wirelessly to a computer or mobile device. Therefore, results do not need to be manually recorded in a log. The caliper is suitable for engineering production, repairs of large parts, and quality control.

The main scale is made of hardened stainless steel, and the measurement is taken care of by a capacitive sensor with a glass fixed grid. The measurement accuracy across the entire range is ±0.05 mm, and the smallest measurable diameter of the hole is 15 mm. The arms with knife tips are 60 mm long and can reach grooves located deeper inside the hole. The electronics with an IP54 rating are protected against dust and splashing water. Values can be displayed in millimetres or inches. The total length of the caliper is 396 mm and the width of the scale is 16 mm. Wireless transmission is particularly useful during serial inspections of large workpieces, where each measured value is recorded.

  • Type – wireless digital caliper for internal grooves in large holes
  • Model – Shahe 5130L-300
  • Measuring Range – 15 to 300 mm
  • Resolution – 0.01 mm and 0.0005 inches
  • Accuracy – ±0.05 mm
  • Data Transfer – wirelessly to a computer or mobile phone
  • Smallest Diameter of Hole – 15 mm
  • Length of Jaw Arms – 60 mm
  • Total Length – 396 mm
  • Material of Scale – hardened stainless steel
  • Sensor – capacitive with a glass fixed grid
  • Protection Rating – IP54
  • Power Supply – CR2032 3 V battery (not included)
  • Contents of Package – wireless internal groove caliper 300 mm in a plastic case

For long calipers, it is advisable to hold the scale straight during measurement so that the arms make contact perpendicularly to the sides of the groove. Before use, clean the tips of chips and oil, and after work, wipe the caliper and store it in the plastic case, which protects the long scale from bending and impacts. If there is a long pause in use, remove the battery. Clean the display and scale only with a dry or slightly damp cloth without solvents. Protect the tips from impacts and do not use the caliper as a lever or scribing needle.

The Shahe 5130L-300 is a suitable choice for workshops that work with large holes and need to record and archive the measured values. The range from 15 to 300 mm and arms 60 mm long cover even large workpieces. Hardened stainless steel and IP54 protection ensure durability in demanding workshop environments. The display with a resolution of 0.01 mm and wireless data transfer speed up the inspection of parts and the recording of measurement results.

Price incl. VAT €229.21