Menu Close
Empty basket
Your basket is currently empty.
Empty basket
0
Choose category
Home page Home page Hobbies & Garden Measuring Instruments Calipers Wireless Digital Caliper for Internal Grooves Shahe 5130L 13 to 200 mm Jaws 50 mm Data Transfer to PC and Mobile Resolution 0.01 mm
Wireless Digital Caliper for Internal Grooves Shahe 5130L 13 to 200 mm Jaws 50 mm Data Transfer to PC and Mobile Resolution 0.01 mm
Wireless Digital Caliper for Internal Grooves Shahe 5130L 13 to 200 mm Jaws 50 mm Data Transfer to PC and Mobile Resolution 0.01 mm 1
Wireless Digital Caliper for Internal Grooves Shahe 5130L 13 to 200 mm Jaws 50 mm Data Transfer to PC and Mobile Resolution 0.01 mm 1
Wireless Digital Caliper for Internal Grooves Shahe 5130L 13 to 200 mm Jaws 50 mm Data Transfer to PC and Mobile Resolution 0.01 mm 2
Wireless Digital Caliper for Internal Grooves Shahe 5130L 13 to 200 mm Jaws 50 mm Data Transfer to PC and Mobile Resolution 0.01 mm 3
Wireless Digital Caliper for Internal Grooves Shahe 5130L 13 to 200 mm Jaws 50 mm Data Transfer to PC and Mobile Resolution 0.01 mm 4
Wireless Digital Caliper for Internal Grooves Shahe 5130L 13 to 200 mm Jaws 50 mm Data Transfer to PC and Mobile Resolution 0.01 mm 5

Wireless Digital Caliper for Internal Grooves Shahe 5130L 13 to 200 mm Jaws 50 mm Data Transfer to PC and Mobile Resolution 0.01 mm

For grooves and notches in holes from 13 to 200 mm with wireless value transfer to PC or mobile. Jaws 50 mm, accuracy ±0.04 mm and IP54 rating. Full description
In stock
€194.28
Safe shopping Safe shopping
Overview
Wireless Digital Caliper for Internal Grooves Shahe 5130L 13 to 200 mm Jaws 50 mm Data Transfer to PC and Mobile Resolution 0.01 mm

The Shahe 5130L with a range of 200 mm is a digital caliper for internal grooves, notches and fittings in medium diameter holes, which wirelessly sends the measured values to a computer or mobile device. The blade tips at the ends of the jaws slide into the hole and measure the groove diameter in the range of 13 to 200 mm. The result is displayed on a large LCD screen with a resolution of 0.01 mm and can simultaneously be sent to the connected device without cables. This eliminates the need for manual transcription of values into a table or report. The caliper is suitable for use in engineering production, machining, maintenance, and quality control.

The main scale is made of hardened stainless steel and the measurement is ensured by a capacitive sensor with a glass fixed grid. The measurement accuracy reaches ±0.04 mm and the smallest diameter of the hole that the caliper can measure is 13 mm. The jaw arms are 50 mm long, allowing access to grooves located further from the edge of the hole. The electronics have an IP54 rating, protecting them from dust and splashing water. Values can be displayed in both millimetres and inches. The total length of the caliper is 286 mm and the scale width is 16 mm. The wireless transfer is especially appreciated by those who inspect larger batches of parts and must record each measured value.

  • Type – wireless digital caliper for internal grooves with blade tips
  • Model – Shahe 5130L-200
  • Measuring Range – 13 to 200 mm
  • Resolution – 0.01 mm and 0.0005 inches
  • Accuracy – ±0.04 mm
  • Data Transfer – wirelessly to a computer or mobile phone
  • Smallest Hole Diameter – 13 mm
  • Jaw Arm Length – 50 mm
  • Total Length – 286 mm
  • Scale Material – hardened stainless steel
  • Sensor – capacitive with a glass fixed grid
  • Rating – IP54
  • Power Supply – CR2032 3 V battery (not included)
  • Package Contents – wireless internal groove caliper 200 mm in a plastic case

Before each measurement, clean the tips of chips and oil to avoid contamination affecting the result. Insert the caliper into the hole, spread the jaws to the sides of the groove, and read the value from the display or send it directly to the computer or phone. After use, wipe the caliper with a dry cloth and store it in the plastic case, which protects it during transport and storage. If the caliper will not be used for an extended period, it is advisable to remove the battery. Do not clean the display with solvents and protect the tips from impacts, as their condition affects the accuracy of each measurement.

The Shahe 5130L-200 combines a medium measuring range with convenient wireless recording of results. It covers internal grooves in holes from 13 to 200 mm and with jaws 50 mm long, it can reach deeper into the part. The hardened stainless steel scale and IP54 rating withstands everyday workshop operations. The large display with a resolution of 0.01 mm and accuracy ±0.04 mm speeds up the inspection of workpieces and reduces the risk of errors during value transcription.

Price incl. VAT €194.28