Home page Home page Jewellery & Watches Piercings Titanium Piercing Ring 1.0 x 6 mm 18G Clicker G23 ASTM F136 with Folding Segment for Septum, Tragus and Daith
Titanium Piercing Ring 1.0 x 6 mm 18G Clicker G23 ASTM F136 with Folding Segment for Septum, Tragus and Daith

Titanium Piercing Ring 1.0 x 6 mm 18G Clicker G23 ASTM F136 with Folding Segment for Septum, Tragus and Daith

Small clicker ring made of G23 titanium with a wire thickness of 1.0 mm and a diameter of 6 mm. It fits snugly around the piercing in the septum, tragus and daith and fastens without beads or screws. Full description
In stock
Colour:
€18.73
Price incl. VATImport charges will apply
Safe shopping Safe shopping
Overview
Titanium Piercing Ring 1.0 x 6 mm 18G Clicker G23 ASTM F136 with Folding Segment for Septum, Tragus and Daith

This small piercing ring is made of implant-grade titanium G23 according to ASTM F136 standards. The wire has a thickness of 18G and the ring measures 1.0 x 6 mm, making it the smallest diameter in this wire thickness. Compared to the thinnest gauge of 20G, the wire is slightly thicker, giving the ring a fuller appearance. It fastens with a clicker-type folding segment that rotates in the joint without a pin and clicks into a groove on the other side. Therefore, you do not need to handle beads or screws when putting it on.

According to the manufacturer's size chart, the 6 mm diameter is primarily suitable for septum, tragus and daith piercings in the ear. The small ring sits closely against the skin and encircles the edge of the piercing, giving it a discreet and subtle look. The connection between the segment and the ring features a pinless joint with a smooth transition, which is clearly visible in the detailed photographs. The smooth round wire without protrusions is suitable for everyday wear.

The thickness of 18G corresponds to a wire diameter of 1.0 mm. Before ordering the ring, please check the thickness of your current jewellery, as a wire that is too thick will not fit into a thinner piercing. Then measure the distance from the piercing to the edge of the septum or ear with a ruler. The manufacturer recommends choosing a diameter slightly larger than the measured distance. You can easily measure at home with a standard ruler and a mirror. If you are unsure, compare the size with jewellery you already wear that fits well. The same model is also available in other diameters and wire thicknesses.

  • Material – implant-grade titanium G23 (ASTM F136)
  • Wire Thickness – 1.0 mm (18G)
  • Ring Diameter – 6 mm
  • Fastening – clicker segment with pinless joint
  • Shape – smooth round ring without protrusions
  • Recommended Use – septum, tragus and daith
  • Contents – 1 piercing ring in a bag

Before first use, clean and disinfect the jewellery with a product designed for piercings. Only put it on the piercing after it has fully healed and avoid exposing it to aggressive cleaning agents. Open the segment by gently flipping it to the side and close it by pressing until it clicks. Do not push the segment at an angle and hold the ring firmly between your fingers. Store the removed ring separately to prevent unnecessary scratches on its surface.

The titanium clicker ring with a diameter of 6 mm is suitable for anyone looking for a small and discreet piece of jewellery with a thicker wire. It fits both septum and tragus and daith piercings in the ear and can be changed quickly and without small parts. The simple round shape combines well with other jewellery in the ear and face. The packaging contains one ring ready for cleaning and wearing.

Price incl. VAT €18.73