Menu Close
Empty basket
Your basket is currently empty.
Empty basket
0
Choose category
Home page Home page Jewellery & Watches Piercings Titanium G23 Nose Ring 0.8 x 10 mm 20G Clicker with Segment without Pin ASTM F136 Piercing for Septum Lip and Ear Cartilage
Titanium G23 Nose Ring 0.8 x 10 mm 20G Clicker with Segment without Pin ASTM F136 Piercing for Septum Lip and Ear Cartilage
Titanium G23 Nose Ring 0.8 x 10 mm 20G Clicker with Segment without Pin ASTM F136 Piercing for Septum Lip and Ear Cartilage black
Titanium G23 Nose Ring 0.8 x 10 mm 20G Clicker with Segment without Pin ASTM F136 Piercing for Septum Lip and Ear Cartilage 1
Titanium G23 Nose Ring 0.8 x 10 mm 20G Clicker with Segment without Pin ASTM F136 Piercing for Septum Lip and Ear Cartilage 2
Titanium G23 Nose Ring 0.8 x 10 mm 20G Clicker with Segment without Pin ASTM F136 Piercing for Septum Lip and Ear Cartilage 3
Titanium G23 Nose Ring 0.8 x 10 mm 20G Clicker with Segment without Pin ASTM F136 Piercing for Septum Lip and Ear Cartilage 4
Titanium G23 Nose Ring 0.8 x 10 mm 20G Clicker with Segment without Pin ASTM F136 Piercing for Septum Lip and Ear Cartilage 5
Titanium G23 Nose Ring 0.8 x 10 mm 20G Clicker with Segment without Pin ASTM F136 Piercing for Septum Lip and Ear Cartilage 6
Titanium G23 Nose Ring 0.8 x 10 mm 20G Clicker with Segment without Pin ASTM F136 Piercing for Septum Lip and Ear Cartilage 7
Titanium G23 Nose Ring 0.8 x 10 mm 20G Clicker with Segment without Pin ASTM F136 Piercing for Septum Lip and Ear Cartilage 8
Titanium G23 Nose Ring 0.8 x 10 mm 20G Clicker with Segment without Pin ASTM F136 Piercing for Septum Lip and Ear Cartilage 9
Titanium G23 Nose Ring 0.8 x 10 mm 20G Clicker with Segment without Pin ASTM F136 Piercing for Septum Lip and Ear Cartilage 10
Titanium G23 Nose Ring 0.8 x 10 mm 20G Clicker with Segment without Pin ASTM F136 Piercing for Septum Lip and Ear Cartilage 11
Titanium G23 Nose Ring 0.8 x 10 mm 20G Clicker with Segment without Pin ASTM F136 Piercing for Septum Lip and Ear Cartilage 12
Titanium G23 Nose Ring 0.8 x 10 mm 20G Clicker with Segment without Pin ASTM F136 Piercing for Septum Lip and Ear Cartilage 13
Titanium G23 Nose Ring 0.8 x 10 mm 20G Clicker with Segment without Pin ASTM F136 Piercing for Septum Lip and Ear Cartilage 14
Titanium G23 Nose Ring 0.8 x 10 mm 20G Clicker with Segment without Pin ASTM F136 Piercing for Septum Lip and Ear Cartilage 15

Titanium G23 Nose Ring 0.8 x 10 mm 20G Clicker with Segment without Pin ASTM F136 Piercing for Septum Lip and Ear Cartilage

Larger clicker ring made of titanium G23 with a thickness of 0.8 mm and a diameter of 10 mm. Fits in the nostril, septum, lip, and ear cartilage and fastens with a single click. Full description
In stock
Colour:
€19.17
Price incl. VATImport charges will apply
Safe shopping Safe shopping
Overview
Titanium G23 Nose Ring 0.8 x 10 mm 20G Clicker with Segment without Pin ASTM F136 Piercing for Septum Lip and Ear Cartilage

The nose ring in the size 0.8 x 10 mm is made from implant-grade titanium G23 according to ASTM F136 standards. The thin wire with a thickness of 20G maintains a delicate appearance, while the diameter of 10 mm is one of the largest sizes in this thickness. The ring closes with a clicker segment, which is housed on one side in a pinless joint and fits into a groove on the other side. When putting it on, you do not have to deal with balls or screws that could fall out. The smooth round wire has no protrusions and appears clean.

According to the manufacturer's size chart, the diameter of 10 mm is suitable for the nostril, septum, lip, and ear cartilage. The ring has enough space around the piercing, making it suitable even where the piercing is located further from the edge. The connection of the segment to the ring forms a pinless joint, so the fastening does not protrude, and the jewellery looks like a continuous circle. The material designation ASTM F136 is indicated directly on the product photos.

The thickness of 20G corresponds to a wire diameter of 0.8 mm. Before ordering, check the thickness of your current jewellery and measure the distance from the piercing to the edge of the nose, lip, or ear with a ruler. The manufacturer recommends choosing a diameter slightly larger than this distance to prevent the ring from pressing. A simple ruler and a mirror are sufficient for measuring. A good guide is also the jewellery you already wear and whose size suits you. If you are looking for a smaller and tighter ring, you can find the same model in smaller diameters and other wire thicknesses in the offer.

  • Material – implant-grade titanium G23 according to ASTM F136
  • Wire thickness – 0.8 mm (20G)
  • Ring diameter – 10 mm
  • Fastening – clicker segment
  • Segment connection – pinless joint with a smooth transition
  • Suitable placement – nostril, septum, lip, and ear cartilage
  • Package contents – 1 titanium clicker ring in a bag

Before the first use, clean and disinfect the ring with a product designed for piercing. Change the jewellery only after the piercing is completely healed and protect it from aggressive chemicals. Open the segment by carefully flipping it to the side and close it by pressing until it clicks. Hold the ring between your thumb and index finger to prevent the wire from bending unnecessarily. When not wearing the jewellery, store it separately from others to avoid scratching its surface.

The titanium clicker ring with a diameter of 10 mm is suitable for anyone who wants a more pronounced yet still delicate piece of jewellery. It can be used in the nose, septum, lip, and ear cartilage, and thanks to the segment fastening, it can be changed in no time. The simple round shape is suitable for everyday wear as well as more formal occasions. In the package, you will receive one ring ready for cleaning and wearing.

Price incl. VAT €19.17