Home page Home page Jewellery & Watches Piercings Titanium Clicker Ring 1.2 x 9 mm 16G with Zirconia at the Front G23 Hinged Segment Piercing for Nose Septum Tragus and Daith
Titanium Clicker Ring 1.2 x 9 mm 16G with Zirconia at the Front G23 Hinged Segment Piercing for Nose Septum Tragus and Daith

Titanium Clicker Ring 1.2 x 9 mm 16G with Zirconia at the Front G23 Hinged Segment Piercing for Nose Septum Tragus and Daith

9 mm clicker ring made of G23 titanium with cubic zirconia on the front side. The hinged segment snaps in without screws, suitable for septum, nose, and ear. Full description
In stock
Colour:
€20.92
Price incl. VATImport charges will apply
Safe shopping Safe shopping
Overview
Titanium Clicker Ring 1.2 x 9 mm 16G with Zirconia at the Front G23 Hinged Segment Piercing for Nose Septum Tragus and Daith

The 9 mm titanium clicker ring is a piercing jewellery piece with a snap-in segment and a row of small cubic zirconia. The ring is made of G23 titanium and the stones adorn its front side, where they gently sparkle with movement. The wire thickness is 1.2 mm (16G) and the ring diameter is 9 mm, making the jewellery more prominent and well-suited for septum, nose, and ear. It is ideal for daith piercings, tragus, or helix. The fastening does not require balls or screws, making both application and replacement simple.

The hinged segment is firmly attached to the ring and opens on one side. After threading through the piercing channel, you can close the segment and snap it in with gentle pressure. The stones are set on the front side of the ring, making them most visible when viewed from the front, such as with septum or daith piercings. The jewellery is designed for piercings with a thickness of 1.2 mm (16G). The 9 mm diameter provides more space than smaller sizes, making it suitable for areas where the jewellery should loosely encircle the septum, the edge of the nostril, or cartilage.

The same clicker ring can be worn in various places, such as in the septum, daith piercing, or helix, provided the thickness of the piercing matches 1.2 mm. The zirconia on the front side adds a striking sparkling accent to the piercing and complements other jewellery on the ear, such as smaller rings or studs. The 9 mm size is suitable for areas where the jewellery should loosely encircle the septum or cartilage. Before choosing, ensure the thickness and placement of your piercing so that the ring fits comfortably.

  • Type of jewellery – clicker ring with hinged segment
  • Material – G23 titanium
  • Decoration – cubic zirconia on the front side of the ring
  • Thickness – 1.2 mm (16G)
  • Diameter – 9 mm
  • Fastening – snap-in segment without screws or balls
  • Use – septum, nostril, tragus, daith, helix, ear cartilage, and lip
  • Contents – 1 piercing ring

Before first use, disinfect the ring, preferably with an antiseptic solution designed for piercings. Do not use alcohol or harsh chemicals for cleaning, as they may damage the surface of the titanium and the shine of the zirconia. Insert the jewellery into a fresh piercing only after complete healing. When replacing, open the segment gently, do not pry it sideways, and check that it is properly snapped shut after closing.

The 9 mm titanium clicker with zirconia is suitable for anyone looking to adorn their piercing with a more prominent sparkling ring featuring a simple fastening. G23 titanium and the snap-in segment allow for quick application and replacement without tools. Thanks to the 9 mm diameter, the jewellery is highly visible and the stones on the front side stand out in the septum, nose, and ear. The ring can be worn alone or complemented with other piercing jewellery. The package includes one piece ready to wear.

Price incl. VAT €20.92