Home page Home page Hobbies & Garden Tools Hand Tools Broken Screw Extractors Set of 10 Broken Screw Extractors 5 Sizes with 2 Pieces Each Hexagonal Shank 6.3 mm Carbon Steel For Drill and Screwdriver
Set of 10 Broken Screw Extractors 5 Sizes with 2 Pieces Each Hexagonal Shank 6.3 mm Carbon Steel For Drill and Screwdriver

Set of 10 Broken Screw Extractors 5 Sizes with 2 Pieces Each Hexagonal Shank 6.3 mm Carbon Steel For Drill and Screwdriver

Spiral extractors will help unscrew broken, stripped, and rusted screws. The 1/4 inch hexagonal shank quickly fits into drills and holders. Full description
In stock
€30.52
Price incl. VATImport charges will apply
Safe shopping Safe shopping
Overview
Set of 10 Broken Screw Extractors 5 Sizes with 2 Pieces Each Hexagonal Shank 6.3 mm Carbon Steel For Drill and Screwdriver

A broken screw, stripped head, or rusted screw can halt even the simplest repair. This set of broken screw extractors contains 10 pieces in 5 sizes, so you have the right tool on hand for both smaller and larger diameters. Each extractor features a conical spiral thread that cuts into the pre-drilled hole when turned counterclockwise, gradually extracting the damaged screw. The tools are made from high-carbon steel and thanks to the hexagonal shank, they can be secured in a drill, cordless screwdriver, or standard bit holder. They are suitable for workshops, garages, furniture repairs, and maintenance of bicycles and machines.

Sizes are marked with numbers #1 to #5 directly on the shank, so you can find the correct piece immediately. The smallest extractor #1 is 52 mm long and its threaded part is 19 mm, while the largest #5 measures 86 mm with a thread length of 34 mm. With two pieces of each size, you have a backup in case one wears out or if you tackle multiple repairs at once. The uniform 6.3 mm shank holds firmly in the chuck and the tool does not slip.

  • Type – extractor for broken and stripped screws with a spiral conical thread
  • Material – high-carbon steel
  • Shank – hexagonal 6.3 mm (1/4 inch)
  • Sizes – #1, #2, #3, #4, and #5
  • Total Length – 52 mm (#1), 62 mm (#2), 66 mm (#3), 76 mm (#4), and 86 mm (#5)
  • Length of Threaded Part – 19 mm (#1), 21 mm (#2), 24 mm (#3), 30 mm (#4), and 34 mm (#5)
  • Colour – grey
  • Usage – drill, cordless screwdriver, or manual bit holder
  • Contents – 10 broken screw extractors (2x #1, 2x #2, 2x #3, 2x #4, and 2x #5)

The procedure is simple. First, drill a hole in the centre of the broken screw using a drill bit that is thinner than the screw itself. Then select the appropriately sized extractor, insert it into the hole, and slowly turn counterclockwise until the thread catches and the screw begins to loosen. Work at low speeds and with care to avoid overloading the tool. The drill bit for pre-drilling and the bit holder are not included in the package. After use, clean the extractors of shavings and store them in a dry place.

The set of broken screw extractors is a practical aid for DIY enthusiasts and craftsmen who want to resolve damaged joints without unnecessary disassembly. The five sizes with two pieces each cover common screws and screws in the home, workshop, and car. The 6.3 mm hexagonal shank ensures quick fastening in a drill or screwdriver. Tools made from carbon steel easily cut into the material while working. You will appreciate the set every time a screw breaks or strips and a standard screwdriver is no longer helpful.

Price incl. VAT €30.52