Home page Home page Shoes Insoles Reinforced Silicone Heel Protectors 1 Pair 9.5 x 3 cm Thickness 0.6 cm Self-Adhesive Transparent Cushions For Shoes Larger by More Than One Size
Reinforced Silicone Heel Protectors 1 Pair 9.5 x 3 cm Thickness 0.6 cm Self-Adhesive Transparent Cushions For Shoes Larger by More Than One Size

Reinforced Silicone Heel Protectors 1 Pair 9.5 x 3 cm Thickness 0.6 cm Self-Adhesive Transparent Cushions For Shoes Larger by More Than One Size

The strongest heel protector design for footwear significantly larger than the foot. The self-adhesive silicone cushion fills the gap and the heel does not slip in the shoe. Full description
In stock
€21.35
Price incl. VATImport charges will apply
Safe shopping Safe shopping
Overview
Reinforced Silicone Heel Protectors 1 Pair 9.5 x 3 cm Thickness 0.6 cm Self-adhesive Transparent Cushions For Shoes Larger by More Than One Size

Reinforced silicone heel protectors are the strongest version in this range and are designed for footwear that is larger by more than one size. The cushion measuring 9.5 x 3 cm adheres to the back of the shoe and with a thickness of 0.6 cm fills even larger gaps between the heel and the shoe edge. This provides greater stability for the foot in the shoe, preventing the heel from slipping out while walking. The protector is made from soft silicone and its entire surface is covered with raised protrusions. It is suitable for court shoes, high-heeled shoes, and men's shoes.

When a shoe is too loose, the foot slides with every step, causing the back edge to rub against the skin on the heel. The thick cushion fills this excess space and the protrusions on its surface provide support for the heel to lean against. The shape of the protector is thicker at the top and thinner at the bottom, so it hugs the heel without pressing on it at just one point. The material is transparent, so the protector does not look intrusive in the shoe, even with lighter models. The underside features an adhesive layer, which is covered by a protective film before use.

  • Product Type – reinforced self-adhesive heel protector
  • Material – soft silicone
  • Dimensions – 9.5 x 3 cm
  • Thickness – approximately 0.6 cm
  • Size Designation – XL
  • Colour – transparent
  • Surface – raised protrusions across the entire surface
  • Attachment – adhesive layer with protective film
  • Intended Use – footwear larger by more than one size, slipping off and rubbing of the heel
  • Features – waterproof, washable, reusable
  • Contents – 1 pair (2 pieces) of reinforced silicone heel protectors

Adhere the protector inside a shoe that is clean and dry. Peel off the protective film, place the cushion in the areas where the heel touches the back of the shoe, and press it firmly for several seconds. According to the manufacturer, the adhesive leaves no residue upon removal. A soiled protector can be rinsed with water and reused after drying, as the silicone retains its stickiness. For shoes that are only slightly larger, a thinner version is preferable, as a thick cushion may press in the shoe. Therefore, before adhering, try on the shoes with the protector in place and choose its exact position based on your walking comfort.

The reinforced heel protector is intended for shoes that are significantly larger than they should be. The package contains 1 pair of protectors, one for each shoe. The thick silicone cushion fills the excess space, keeps the heel in place, and softens the pressure from the hard edge. The transparent design remains unobtrusive in the footwear. You will appreciate the protectors in shoes that you have purchased more than one size larger, but do not wish to stop wearing them.

Price incl. VAT €21.35