Menu Close
Empty basket
Your basket is currently empty.
Empty basket
0
Choose category
Home page Home page Hobbies & Garden Tools Hand Tools Masonry Tools Paver Mould 40 x 40 x 10 cm Double Eight Shape with 5 Square Holes Plastic White For Parking Spaces and Driveways
Paver Mould 40 x 40 x 10 cm Double Eight Shape with 5 Square Holes Plastic White For Parking Spaces and Driveways
Paver Mould 40 x 40 x 10 cm Double Eight Shape with 5 Square Holes Plastic White For Parking Spaces and Driveways 1
Paver Mould 40 x 40 x 10 cm Double Eight Shape with 5 Square Holes Plastic White For Parking Spaces and Driveways 1
Paver Mould 40 x 40 x 10 cm Double Eight Shape with 5 Square Holes Plastic White For Parking Spaces and Driveways 2

Paver Mould 40 x 40 x 10 cm Double Eight Shape with 5 Square Holes Plastic White For Parking Spaces and Driveways

Thick-walled plastic mould for producing concrete grass pavers with a height of 10 cm. Suitable for reinforcing parking areas and driveways used by vehicles. Full description
In stock
€119.17
Price incl. VATImport charges will apply
Safe shopping Safe shopping
Overview
Paver Mould 40 x 40 x 10 cm Double Eight Shape with 5 Square Holes Plastic White For Parking Spaces and Driveways

The plastic mould allows you to create your own concrete grass pavers directly in your garden or on-site. The finished paver has dimensions of 40 x 40 x 10 cm and features a so-called double eight shape, formed from several interlocking squares. Inside the paver, there will be 5 square holes arranged in an X shape, into which soil can later be filled and grass sown. Simply fill the mould with concrete mix, allow it to set, and then remove the finished piece. Gradually, you can produce as many slabs as you need for the entire area.

The height of 10 cm provides the paver with sufficient thickness for areas that are walked on or driven over. Therefore, it is suitable for parking spaces in front of the house, garage entrances, or the edges of driveways. The wavy outline of the paver is designed so that individual pieces fit together during installation, creating a continuous surface with a regular network of greenery. The mould is made from durable plastic with smooth inner walls, allowing the hardened concrete to be easily released. Thanks to its white colour, it is easy to see whether the mould is filled to the top edge and if there are any empty spots left in the corners. The square cores that form the holes are a fixed part of the mould, so they do not shift during filling.

  • Type – mould for concrete grass paver
  • Paver Dimensions – 40 x 40 x 10 cm
  • Shape – double eight with a wavy outline
  • Holes for Grass – 5 square holes arranged in an X shape
  • Material – plastic
  • Colour – white
  • Usage – parking spaces, driveways, and reinforced areas in the garden
  • Package Contents – 1 plastic mould for grass paver

Before each filling, it is advisable to coat the inner walls of the mould with release oil to make it easier to remove the paver and keep the edges sharp. Level the concrete mix after pouring and tap the walls of the mould to expel air bubbles. Remove the finished piece only after the concrete has sufficiently hardened. Rinse the mould with water before the remnants of the mix dry on it, and store it in a flat position to maintain its shape.

Homemade grass pavers represent a cost-effective way to reinforce an area while preserving the lawn. The mould measuring 40 x 40 cm with a height of 10 cm creates robust slabs suitable even for areas where cars pass. The holes in the paver allow rainwater to permeate back into the soil, preventing water from flowing onto neighbouring properties or into the drainage system. The plastic mould can be reused, allowing you to produce paving gradually according to time and need. It is suitable for parking spaces, driveways, and garden paths where green grass should remain visible.

Price incl. VAT €119.17