Home page Home page Hobbies & Garden Tools Hand Tools Masonry Tools Mould for Textured Paving Slabs 25 x 25 x 5 cm With Relief of 5 Stripes Plastic White Reusable For Concrete Slabs and Pathways
Mould for Textured Paving Slabs 25 x 25 x 5 cm With Relief of 5 Stripes Plastic White Reusable For Concrete Slabs and Pathways

Mould for Textured Paving Slabs 25 x 25 x 5 cm With Relief of 5 Stripes Plastic White Reusable For Concrete Slabs and Pathways

Plastic mould for concrete slabs with longitudinal stripes. Cast your own textured paving for garden paths, driveways, patios, or steps. Full description
In stock
€34.02
Safe shopping Safe shopping
Overview
Mould for Textured Paving Slabs 25 x 25 x 5 cm With Relief of 5 Stripes Plastic White Reusable For Concrete Slabs and Pathways

The plastic mould for textured paving is used for casting square concrete slabs with a relief of longitudinal stripes. The finished slab measures 25 x 25 cm and has a height of 5 cm, making it sufficiently robust for pathways, garden paths, and areas at driveways. At the bottom of the mould, there are 5 longitudinal grooves, from which raised stripes of 22 cm in length and 2 cm in width will form on the surface of the slab. This surface resembles guiding tactile paving and also acts as a non-slip treatment. The mould can be reused, allowing you to create as many slabs as you need.

The mould is made from white plastic with a straight edge all around, which facilitates the alignment of the concrete mix to a level surface. The stripes are evenly spaced and run parallel to one side of the slab, so when laying the slabs, you can orient all of them in the same direction to create a continuous guiding strip. The square shape fits well next to each other and is also suitable for combination with smooth slabs of the same size. From one mould, you can produce slabs in any quantity and colour them with concrete pigment as needed, allowing you to choose whether the textured strip will blend subtly with the surroundings or stand out distinctly from the rest of the area.

  • Type – mould for concrete slab with relief of longitudinal stripes
  • Slab Size – 25 x 25 cm
  • Slab Height – 5 cm
  • Relief – 5 longitudinal stripes of 22 cm in length and 2 cm in width
  • Material – plastic
  • Colour – white
  • Usage – pathways, garden paths, patios, areas around driveways and steps
  • Package Contents – 1 mould for slab 25 x 25 cm

Before pouring, lightly coat the mould with release oil or another releasing agent to ensure the concrete releases easily after curing. Pour the concrete mix up to the top edge, tap the sides of the mould to expel air bubbles, and level the surface with a batten or trowel. Allow the slab to cure in the shade and only then carefully turn it out. After each use, wash the mould with water, remove any cement residue, and store it flat to prevent deformation.

The mould for textured paving is a practical aid for anyone wishing to create textured concrete slabs by themselves. The result is square slabs with five raised stripes that improve orientation and the stability of steps on pathways. With a height of 5 cm, the slabs are also suitable for more heavily trafficked areas around the home. The smooth walls of the mould facilitate the removal of the finished product, and the mould is reusable for further batches. Thus, a garden path, patio, or access to the entrance can achieve a uniform appearance at a fraction of the cost of ready-made paving.

Price incl. VAT €34.02