LUNZO s.r.o. (Czechia) · info@lunzo.ie · +420 603 337 330 · Mon–Sun 8:00–17:00 Irish time · support in English · Contact Us

Home page Home page PC & Laptop Accessories Printers and 3D printing 3D printing accessories Filament storage and drying Filament Dryer 363 x 278 x 131 mm for 4 Rolls of 1 kg with Adjustable Temperature 35–70 °C and Easy Installation Black for Drying During Printing
Filament Dryer 363 x 278 x 131 mm for 4 Rolls of 1 kg with Adjustable Temperature 35–70 °C and Easy Installation Black for Drying During Printing

Filament Dryer 363 x 278 x 131 mm for 4 Rolls of 1 kg with Adjustable Temperature 35–70 °C and Easy Installation Black for Drying During Printing

Rolls are dried directly during printing and do not need to be removed before each job. The temperature is adjustable from 35 to 70 °C and the drying process is displayed on the screen. Full description
In stock
Delivery €1.59
30-day return policy
€160.22
Safe shopping Safe shopping
Overview
Filament Dryer 363 x 278 x 131 mm for 4 Rolls of 1 kg with Adjustable Temperature 35–70 °C and Easy Installation Black for Drying During Printing

This filament dryer manages drying simultaneously with ongoing printing, so rolls do not need to be removed and dried separately before each job. The space accommodates four rolls of 1 kg, thus providing a complete supply of material for longer printing tasks. The temperature is adjustable from 35 to 70 °C depending on the type of filament currently being printed. The dimensions of 363 x 278 x 131 mm correspond to a low cabinet that fits under or beside the printer while leaving free space above. On the front, there is a display with touch buttons, and the entire body is in a black finish with a dark transparent cover.

  • Drying During Printing – filament remains dry throughout the printing task, as drying runs simultaneously with the unwinding of the filament into the printer. This eliminates interruptions due to moving spools to a separate dryer.
  • Capacity – inside there is space for four rolls of 1 kg, so each spool does not need to be dried separately in several cycles. Up to four kilograms of material can be prepared in one cycle.
  • Temperature Setting – the range of 35–70 °C covers both lower values for softer materials and higher temperatures for filaments that require longer and warmer drying. The value is selected in increments directly on the control panel.
  • Display – shows both the current and set temperature, humidity inside, and countdown timer, making the drying status easily readable at a glance. The touch buttons below the data serve to turn on, change values, and confirm settings.
  • Easy Installation – the package includes hinges, screws, and an Allen key, so everything needed for assembly is at hand and no additional tools need to be purchased. The device is connected using the included power cable.
  • Dimensions – the cabinet measures 363 x 278 x 131 mm and due to its low profile, it takes up no more space on the workbench than necessary. The dark transparent cover allows a view inside even when the lid is closed.

Contents of the Package:

  • 1x filament dryer
  • 4x hinge
  • 8x screw with internal hexagon
  • 1x power cable
  • 1x Allen key

The dryer is suitable for longer prints where filament left outside a dry environment would become damp. With a capacity of 4 x 1 kg, it is possible to have material ready for several printing tasks in advance without needing to transfer anything. The temperature setting in the range of 35–70 °C allows for drying tailored to specific filaments, from softer materials to filaments that can withstand higher temperatures. Hinges, screws, and Allen key are included in the delivery, so installation can take place immediately after unpacking. Filament and printer are not included in the package.

Delivery and Returns
Price incl. VAT €160.22