Menu Close
Empty basket
Your basket is currently empty.
Empty basket
0
Choose category
Home page Home page Hobbies & Garden Measuring Instruments Calipers Digital Internal Groove Caliper Shahe 5130 15 to 300 mm for Large Holes Arms 60 mm Resolution 0.01 mm IP54 Stainless Steel
Digital Internal Groove Caliper Shahe 5130 15 to 300 mm for Large Holes Arms 60 mm Resolution 0.01 mm IP54 Stainless Steel
Digital Internal Groove Caliper Shahe 5130 15 to 300 mm for Large Holes Arms 60 mm Resolution 0.01 mm IP54 Stainless Steel 1
Digital Internal Groove Caliper Shahe 5130 15 to 300 mm for Large Holes Arms 60 mm Resolution 0.01 mm IP54 Stainless Steel 1
Digital Internal Groove Caliper Shahe 5130 15 to 300 mm for Large Holes Arms 60 mm Resolution 0.01 mm IP54 Stainless Steel 2
Digital Internal Groove Caliper Shahe 5130 15 to 300 mm for Large Holes Arms 60 mm Resolution 0.01 mm IP54 Stainless Steel 3
Digital Internal Groove Caliper Shahe 5130 15 to 300 mm for Large Holes Arms 60 mm Resolution 0.01 mm IP54 Stainless Steel 4
Digital Internal Groove Caliper Shahe 5130 15 to 300 mm for Large Holes Arms 60 mm Resolution 0.01 mm IP54 Stainless Steel 5
Digital Internal Groove Caliper Shahe 5130 15 to 300 mm for Large Holes Arms 60 mm Resolution 0.01 mm IP54 Stainless Steel 6
Digital Internal Groove Caliper Shahe 5130 15 to 300 mm for Large Holes Arms 60 mm Resolution 0.01 mm IP54 Stainless Steel 7

Digital Internal Groove Caliper Shahe 5130 15 to 300 mm for Large Holes Arms 60 mm Resolution 0.01 mm IP54 Stainless Steel

For large holes from 15 to 300 mm with grooves and notches. Long arms of 60 mm, accuracy ±0.05 mm, stainless scale and data output for production. Full description
In stock
€187.29
Safe shopping Safe shopping
Overview
Digital Internal Groove Caliper Shahe 5130 15 to 300 mm for Large Holes Arms 60 mm Resolution 0.01 mm IP54 Stainless Steel

The Shahe 5130 digital caliper with a range of 300 mm is designed for measuring internal grooves, notches, and fittings in large holes and housings. It can measure diameters in the range of 15 to 300 mm, making it suitable for large parts and enclosures. The arms with knife tips have a length of 60 mm and can reach grooves located deeper inside the hole. The measured value is displayed on an LCD screen with a resolution of 0.01 mm, in millimetres or inches. The caliper is suitable for engineering production, repairs of large parts, and quality control.

The main scale is made of hardened stainless steel, and measurement is ensured by a capacitive sensor with a glass fixed grid. The measurement accuracy across the entire range is ±0.05 mm and the smallest measurable diameter of the hole is 15 mm. The electronics with an IP54 rating are protected against dust and splashing water. The caliper has a data output, allowing measured values to be transferred for further processing and archiving. The total length of the caliper is 396 mm and the width of the scale is 16 mm. The longer scale allows for measuring grooves in large housings, flanges, and gearboxes, where shorter calipers are insufficient.

  • Type – digital caliper for internal grooves in large holes
  • Model – Shahe 5130-300
  • Measurement Range – 15 to 300 mm
  • Resolution – 0.01 mm and 0.0005 inches
  • Accuracy – ±0.05 mm
  • Smallest Hole Diameter – 15 mm
  • Jaw Arm Length – 60 mm
  • Total Length – 396 mm
  • Scale Material – hardened stainless steel
  • Sensor – capacitive with glass fixed grid
  • Protection Rating – IP54
  • Data Output – yes
  • Power Supply – CR2032 3 V battery with a lifespan of over 1 year (not included)
  • Package Contents – digital internal groove caliper 300 mm in a plastic case

When using the longer caliper, it is advisable to hold the scale straight while measuring to ensure the arms are perpendicular to the sides of the groove. Before use, clean the tips of chips and oil, and after work, wipe the caliper and store it in the plastic case. The case protects the long scale from bending and impacts during transport. If there is a long break in use, it is recommended to remove the battery. Clean the display and scale only with a dry or slightly damp cloth without solvents. Protect the tips from impacts, as their condition affects measurement accuracy, and do not use the caliper as a lever or scribing needle.

The Shahe 5130-300 is the longest version of the internal groove caliper and is suitable for any applications involving large holes. The range from 15 to 300 mm and arms measuring 60 mm cover even large workpieces. Hardened stainless steel and an IP54 rating ensure durability in demanding workshop environments. The LCD display with a resolution of 0.01 mm and data output expedite part inspection and recording of measurement results.

Price incl. VAT €187.29