Menu Close
Empty basket
Your basket is currently empty.
Empty basket
0
Choose category
Home page Home page Hobbies & Garden Measuring Instruments Calipers Digital Depth Gauge for External Diameters 0–150 mm Rounded Spring Jaws Resolution 0.1 mm LCD Display HOLD Function For Workshop and Wood
Digital Depth Gauge for External Diameters 0–150 mm Rounded Spring Jaws Resolution 0.1 mm LCD Display HOLD Function For Workshop and Wood
Digital Depth Gauge for External Diameters 0–150 mm Rounded Spring Jaws Resolution 0.1 mm LCD Display HOLD Function For Workshop and Wood 1
Digital Depth Gauge for External Diameters 0–150 mm Rounded Spring Jaws Resolution 0.1 mm LCD Display HOLD Function For Workshop and Wood 1
Digital Depth Gauge for External Diameters 0–150 mm Rounded Spring Jaws Resolution 0.1 mm LCD Display HOLD Function For Workshop and Wood 2
Digital Depth Gauge for External Diameters 0–150 mm Rounded Spring Jaws Resolution 0.1 mm LCD Display HOLD Function For Workshop and Wood 3
Digital Depth Gauge for External Diameters 0–150 mm Rounded Spring Jaws Resolution 0.1 mm LCD Display HOLD Function For Workshop and Wood 4
Digital Depth Gauge for External Diameters 0–150 mm Rounded Spring Jaws Resolution 0.1 mm LCD Display HOLD Function For Workshop and Wood 5
Digital Depth Gauge for External Diameters 0–150 mm Rounded Spring Jaws Resolution 0.1 mm LCD Display HOLD Function For Workshop and Wood 6

Digital Depth Gauge for External Diameters 0–150 mm Rounded Spring Jaws Resolution 0.1 mm LCD Display HOLD Function For Workshop and Wood

Depth gauge with rounded jaws for measuring external diameters of pipes and rods as well as wall thicknesses. Digital readout in mm and inches, HOLD and locking screw. Full description
In stock
€105.20
Safe shopping Safe shopping
Overview
Digital Depth Gauge for External Diameters 0–150 mm Rounded Spring Jaws Resolution 0.1 mm LCD Display HOLD Function For Workshop and Wood

The ETOPOO digital depth gauge with rounded jaws is designed for measuring the external diameters of pipes, rods, shafts, and cylindrical parts as well as wall thicknesses within the range of 0–150 mm. The curved jaws embrace the measured part even in places where the straight jaws of a caliper cannot reach, such as over a step or the edge of a container. The result is displayed on a large LCD screen with a resolution of 0.1 mm, eliminating the need to transfer the measurement to a ruler. The jaws are spring-loaded and automatically pull towards the measured part. The gauge is suitable for machine and locksmith workshops, for lathes, and for carpentry workshops.

On the display, you can switch between millimetres, inches with a step of 0.01 inches, and fractions of an inch with a step of 1/64. The HOLD button retains the measured value, allowing you to read it after removing the gauge from the part. The locking screw secures the jaws' opening, enabling you to quickly check multiple pieces with the same dimension. The jaws made of metal alloy have a chromed finish, the handle is metal with ribbing, and after a period of inactivity, the gauge automatically turns off.

  • Type – digital depth gauge for measuring external dimensions with rounded spring-loaded jaws
  • Measurement Range – 0–150 mm
  • Resolution – 0.1 mm and 0.01 inches
  • Units – millimetres, inches, and fractions of an inch in 1/64 increments
  • Display – large LCD display in a round housing
  • Functions – power on and zeroing, unit switching, value HOLD, power off, automatic shut-off
  • Jaw Locking – locking screw
  • Material – metal, jaws made of metal alloy with chromed finish
  • Handle – metal with ribbing
  • Power Supply – CR2032 3V button battery, not included
  • Brand – ETOPOO
  • Package Contents – digital depth gauge for external diameters 0–150 mm without battery

First, insert the CR2032 battery into the gauge and turn it on. Open the jaws, place them against the measured part, and allow them to settle, then gently rotate the gauge to ensure the tips capture the smallest dimension perpendicular to the part's axis. Keep the tips of the jaws clean and protect them from impacts to maintain reliable measurements. After use, wipe the gauge free of dust, shavings, and chips, and store it in a dry place away from moisture. For prolonged storage, remove the battery to prevent leakage and damage to the contacts.

The depth gauge with a digital display speeds up the measurement of external diameters and wall thicknesses for parts that are difficult to insert into the straight jaws of a caliper. The range of 0–150 mm covers standard pipes, rods, shafts, and turned wooden products. You can read the value directly in mm, in inches, or in fractions of an inch, and the HOLD function allows you to retain it on the display. The locking screw aids in the serial inspection of identical pieces. Thanks to the rounded jaws, it can also encompass parts with steps or protruding edges.

Price incl. VAT €105.20