Menu Close
Empty basket
Your basket is currently empty.
Empty basket
0
Choose category
Home page Home page Hobbies & Garden Measuring Instruments Calipers Digital Calliper INSTAR 145-301 0–150 mm IP67 Rated Coolant Resistant Resolution 0.01 mm Stainless Steel For Workshop and Production
Digital Calliper INSTAR 145-301 0–150 mm IP67 Rated Coolant Resistant Resolution 0.01 mm Stainless Steel For Workshop and Production
Digital Calliper INSTAR 145-301 0–150 mm IP67 Rated Coolant Resistant Resolution 0.01 mm Stainless Steel For Workshop and Production 1
Digital Calliper INSTAR 145-301 0–150 mm IP67 Rated Coolant Resistant Resolution 0.01 mm Stainless Steel For Workshop and Production 1
Digital Calliper INSTAR 145-301 0–150 mm IP67 Rated Coolant Resistant Resolution 0.01 mm Stainless Steel For Workshop and Production 2
Digital Calliper INSTAR 145-301 0–150 mm IP67 Rated Coolant Resistant Resolution 0.01 mm Stainless Steel For Workshop and Production 3
Digital Calliper INSTAR 145-301 0–150 mm IP67 Rated Coolant Resistant Resolution 0.01 mm Stainless Steel For Workshop and Production 4
Digital Calliper INSTAR 145-301 0–150 mm IP67 Rated Coolant Resistant Resolution 0.01 mm Stainless Steel For Workshop and Production 5
Digital Calliper INSTAR 145-301 0–150 mm IP67 Rated Coolant Resistant Resolution 0.01 mm Stainless Steel For Workshop and Production 6
Digital Calliper INSTAR 145-301 0–150 mm IP67 Rated Coolant Resistant Resolution 0.01 mm Stainless Steel For Workshop and Production 7
Digital Calliper INSTAR 145-301 0–150 mm IP67 Rated Coolant Resistant Resolution 0.01 mm Stainless Steel For Workshop and Production 8

Digital Calliper INSTAR 145-301 0–150 mm IP67 Rated Coolant Resistant Resolution 0.01 mm Stainless Steel For Workshop and Production

Waterproof digital calliper with a range of 150 mm for precise measurement of external and internal dimensions and depth in the workshop and at machines with coolant. Full description
In stock
€144.50
Safe shopping Safe shopping
Overview
Digital Calliper INSTAR 145-301 0–150 mm IP67 Rated Coolant Resistant Resolution 0.01 mm Stainless Steel For Workshop and Production

The Digital Calliper INSTAR 145-301 is designed for precise measurement in the workshop, in engineering production, and during machine maintenance. The measuring range 0–150 mm covers most common components, screws, shafts, tubes, and castings. The electronics are protected with IP67 rating, allowing the calliper to withstand dust, water, and coolant used with machine tools. The measured value is displayed on a clear LCD screen with a resolution of 0.01 mm. Both the body and the rule are made of stainless steel, which is highly resistant to wear and corrosion. The scale on the rule also allows for quick reference checks of the jaws' position without looking at the display.

Model 145 features a rounded electronics housing with a raised IP67 symbol, which fits comfortably in the hand. Control is managed by two buttons, MM/IN and O/ON, which toggle between millimetres and inches, zero the reading, and select absolute and incremental measurement. In incremental mode, you can zero the display at any jaw position and measure differences against a reference part. The set position is secured by a locking screw on the top of the housing. The manufacturer states a measurement repeatability of 0.01 mm, ensuring that repeated measurements of the same part yield consistent results.

  • Type – digital calliper
  • Model – INSTAR 145-301
  • Measuring Range – 0–150 mm
  • Resolution – 0.01 mm / 0.0005"
  • Repeatability – 0.01 mm / 0.0005"
  • Rating – IP67, coolant resistant
  • Material – stainless steel
  • Display – LCD
  • Control – MM/IN and O/ON buttons
  • Function – switching mm/inches, zeroing, absolute and incremental measurement (ABS/INC)
  • Measurement – external and internal dimensions, depth
  • Locking – locking screw
  • Power Supply – CR2032 lithium battery
  • Package Contents – Digital Calliper INSTAR 145-301, CR2032 battery not included

After use, simply wipe the calliper clean of dirt and coolant residue and store it in a dry place. Protect the measuring surfaces of the jaws from impacts and do not use the calliper as a marking needle or lever. The battery can be replaced by unscrewing the cover on the back of the housing, where the CR2032 cell is inserted. The rule is stamped with a serial number, allowing you to easily distinguish the calliper from other units in the workshop. For long-term storage, it is recommended to remove the battery to prevent discharge or damage to the contacts. Before each measurement, it is advisable to close the jaws and check that the display shows zero.

INSTAR 145-301 is a reliable tool for anyone who needs to measure quickly, clearly, and with a resolution of hundredths of a millimetre. The combination of stainless construction, waterproof rating, and the ability to switch between millimetres and inches makes it a versatile tool for machinists, locksmiths, model makers, and DIY enthusiasts. The 150 mm range is sufficient for the vast majority of common parts, and the calliper can handle external dimensions, internal diameters, and the depth of grooves and holes. Thanks to its resistance to coolant, it can be used directly at the lathe or milling machine.

Price incl. VAT €144.50