Home page Home page Shoes Shoe Care & Cleaning Wooden Shoe Horn 34 cm Shoe Remover with Grooved Step Pad and Black Fork Edge for Wellies, Cowboy and Work Boots
Wooden Shoe Horn 34 cm Shoe Remover with Grooved Step Pad and Black Fork Edge for Wellies, Cowboy and Work Boots

Wooden Shoe Horn 34 cm Shoe Remover with Grooved Step Pad and Black Fork Edge for Wellies, Cowboy and Work Boots

Remove high boots without bending and without using your hands. Press the heel into the fork, step on the pad with the other foot, and the boot will easily slide off your foot. Full description
In stock
€32.71
Price incl. VATImport charges will apply
Safe shopping Safe shopping
Overview
Wooden Shoe Horn 34 cm Shoe Remover with Grooved Step Pad and Black Fork Edge for Wellies, Cowboy and Work Boots

A shoe horn is a simple tool that allows you to remove even high or snug-fitting boots without bending and without pulling with your hands. It is made of wood and measures 34 cm in length, making it comfortable to stand on. Press the heel of the shoe into the fork at the end, step on the step surface with your other foot, and simply pull your foot out. You can thus remove your shoes while standing, without sitting down or leaning against a wall. It is suitable for the hallway, corridor, workshop, cabin, and the back entrance to the garden.

The fork is 9.5 cm wide at its widest point, and the heel opening is 6 cm wide. Thanks to its widely spread shape, it accommodates even bulky shoes of larger sizes. The edge of the fork is lined with a black protective layer that prevents the shoe from being scratched against the wood and, according to the manufacturer, does not stain or leave marks. On the top side, there is a black grooved step pad that you step on with your other foot while removing your shoes. On the underside, there is a wooden support that is 4.5 cm high, which raises the fork above the floor, allowing the heel of the shoe to slide in easily.

  • Type – shoe horn (shoe remover)
  • Material – wood
  • Length – 34 cm
  • Width of the fork – 9.5 cm
  • Width of the heel opening – 6 cm
  • Width of the narrower end – 6 cm
  • Height of the support – 4.5 cm
  • Step surface – black grooved pad
  • Fork – black protective edge against shoe abrasion
  • Suitable for – cowboy, work, rubber, hunting, snowboarding, and skiing boots as well as regular footwear
  • Package contents – 1 wooden shoe horn

Place the shoe horn on a flat surface so that the support is on the ground and the fork is facing you. Insert the heel of the shoe into the opening, step firmly on the pad with your other foot, and slowly pull your foot out of the shoe. Repeat the same process for the other shoe. After use, simply wipe the shoe horn with a dry or slightly damp cloth and allow it to dry away from direct heat sources. Due to its low height and flat design, you can store it under a bench in the hallway, in a shoe cabinet, by the door, or in the boot of your car, so it is always within reach. The lightweight shoe horn can be easily carried wherever you need it, such as from the hallway to the garage or to the cabin.

The wooden shoe horn is appreciated by anyone who wears high wellies, work shoes, or cowboy boots and does not want to bend while removing them. It is also helpful for seniors and people with back pain or limited mobility, for whom removing shoes while standing is challenging. The protective edge in the fork protects the surface of the shoes, so they do not get scratched or stained while removing them. It significantly eases the process of removing shoes after working in the garden, in the woods, in the stable, or after returning from the slopes. In the package, you will receive one shoe horn that you can start using immediately after unpacking.

Price incl. VAT €32.71