Home page Home page Home & Household Supplies Plumbing Tap aerators and attachments Threaded Connector for Tap with Internal Thread M22 and Internal Thread M24 Chrome-Plated Brass Reducer for Aerator Attachment and Filter
Threaded Connector for Tap with Internal Thread M22 and Internal Thread M24 Chrome-Plated Brass Reducer for Aerator Attachment and Filter

Threaded Connector for Tap with Internal Thread M22 and Internal Thread M24 Chrome-Plated Brass Reducer for Aerator Attachment and Filter

The connector made of chrome-plated brass has internal threads at both ends, M22 and M24. It connects parts with external threads M22 and M24 on the tap, aerator, and filter. Full description
In stock
€12.18
Price incl. VATImport charges will apply
Safe shopping Safe shopping
Overview
Threaded Connector for Tap with Internal Thread M22 and Internal Thread M24 Chrome-Plated Brass Reducer for Aerator Attachment and Filter

The threaded connector for the tap helps where two parts with external threads of different sizes meet. At one end, it has a internal thread M22 and at the other an internal thread M24, both with fine pitch. The connector thus connects, for example, the outlet of a tap with an external thread M24 to an aerator, attachment, or filter that has an external thread M22, or vice versa. It is suitable for use in the kitchen and bathroom. Installation can be done by hand or with the aid of a standard wrench.

The connector is made of brass with a chrome-plated surface, which is shiny and smooth and matches well with chrome taps. The outer casing is a smooth cylinder without sharp edges, making the connector unobtrusive on the tap. Brass is a proven material for taps for both cold and hot water. Thanks to the two internal threads, the connector acts as a short transition nut, into which parts with external threads are screwed from both sides. After installation, it only slightly extends the outlet and does not restrict the operation of the tap. It is particularly useful when you have purchased an aerator or swivel attachment and found that its thread does not match the thread on your tap.

  • Type – threaded connector (reducer) for tap
  • First Thread – internal M22, fine thread, diameter 22 mm
  • Second Thread – internal M24, fine thread, diameter 24 mm
  • Material – brass
  • Surface – chrome-plated, shiny
  • Usage – connecting parts with external thread M22 and external thread M24
  • Suitable for – kitchen and bathroom taps, aerators, extension attachments, tap filters
  • Contents of Package – 1 threaded connector M22 to M24

Before ordering the connector, measure the threads of both parts you wish to connect. Unscrew the aerator and use a caliper to measure the external diameter of the thread on the tap outlet and on the attached attachment. If one part measures approximately 22 mm and the other 24 mm and both have external threads, this connector is suitable. Insert seals into the threads to prevent water leakage, and tighten carefully. Keep the surface clean with a damp cloth and a gentle non-abrasive cleaner to maintain its shine.

The connector with internal threads M22 and M24 is a small but useful part for anyone wanting to attach an accessory with a different thread size to a tap. It is made of brass with a shiny chrome finish, which complements standard taps. You will find it useful when installing an aerator, filter, or swivel extension when the threads do not match. Just ensure that both connected parts have external threads, one M22 and the other M24. Then simply screw on the connector and your parts are connected.

Price incl. VAT €12.18