Home page Home page Home & Household Supplies Plumbing Tap aerators and attachments Threaded Connector for Tap from Internal Thread M22 to External Thread M22 Chrome-Plated Brass Adapter for Faucet Outlet for Aerator and Filter
Threaded Connector for Tap from Internal Thread M22 to External Thread M22 Chrome-Plated Brass Adapter for Faucet Outlet for Aerator and Filter

Threaded Connector for Tap from Internal Thread M22 to External Thread M22 Chrome-Plated Brass Adapter for Faucet Outlet for Aerator and Filter

The connector screws onto the outlet with an external thread M22 and offers again an external thread M22, allowing you to connect an attachment, aerator or water filter to it. Full description
In stock
€12.18
Price incl. VATImport charges will apply
Safe shopping Safe shopping
Overview
Threaded Connector for Tap from Internal Thread M22 to External Thread M22 Chrome-Plated Brass Adapter for Faucet Outlet for Aerator and Filter

The threaded connector for the tap is an adapter for faucets that have an M22 thread on the outside of the outlet. At one end, it has a female thread M22 and at the other male thread M22, both with a fine pitch. You screw the connector onto the outlet with an external thread M22 instead of the original cap with the aerator. You then connect an attachment, aerator or filter with an internal thread M22 to its other end. It is suitable for use in the kitchen, bathroom, or at the sink, and you can install it without a plumber.

The connector is made of brass with a chrome-plated surface that is shiny and smooth, matching standard faucets. The upper part with the internal thread forms a smooth cylinder, while the lower part carries the external thread of the same size. Both threads have the same diameter, therefore the connector does not change the size of the thread but converts the external thread on the outlet to an external thread for accessories with an internal thread. The faucet outlet is also slightly extended downwards. Brass has been used for plumbing connectors for a long time because it withstands both cold and hot water well. The connector is also useful as a spare part when it turns out that parts with the same thread cannot be connected directly during the replacement of the attachment.

  • Type – threaded connector (adapter) for tap
  • First thread – internal M22, fine thread, diameter 22 mm
  • Second thread – external M22, fine thread, diameter 22 mm
  • Material – brass
  • Surface – chrome-plated, shiny
  • Use – connecting an attachment, aerator or filter with an internal thread M22 to an outlet with an external thread M22
  • Suitable for – kitchen and bathroom faucets with an external thread on the outlet
  • Package content – 1 threaded connector M22 to M22

Before ordering, check the thread on the faucet outlet. Remove the cap with the aerator and measure the external diameter of the thread with a caliper. If you measure approximately 22 mm and the thread is on the surface of the outlet, the connector is suitable. Insert the seal into the connector and tighten it evenly without excessive force. Clean the chrome-plated surface with a soft damp cloth and a mild detergent, do not use abrasive sponges. You can dissolve limescale with a weak solution of vinegar and then rinse the part with clean water. You can unscrew the connector at any time when replacing accessories and use it again.

The connector from internal thread M22 to external thread M22 is a practical adapter for faucets with a thread on the surface of the outlet. Brass with a chrome finish looks neat and does not disrupt the appearance of the faucet. You will use it when installing an aerator, swivel extender, or water filter. Just verify that the outlet has an external thread M22. Then screw on the connector and connect the necessary attachment to its M22 thread.

Price incl. VAT €12.18