Home page Home page Home & Household Supplies Plumbing Tap aerators and attachments Threaded Adapter for Tap from Internal Thread M28 to External Thread M22 Chrome-Plated Brass Reduction for Tap Outlet for Aerator and Filter
Threaded Adapter for Tap from Internal Thread M28 to External Thread M22 Chrome-Plated Brass Reduction for Tap Outlet for Aerator and Filter

Threaded Adapter for Tap from Internal Thread M28 to External Thread M22 Chrome-Plated Brass Reduction for Tap Outlet for Aerator and Filter

The adapter screws onto the tap outlet with an external thread M28 and offers an external thread M22 for a standard aerator, swivel extension or water filter. Full description
In stock
€12.18
Price incl. VATImport charges will apply
Safe shopping Safe shopping
Overview
Threaded Adapter for Tap from Internal Thread M28 to External Thread M22 Chrome-Plated Brass Reduction for Tap Outlet for Aerator and Filter

The threaded adapter for a tap is designed for taps that have an external thread on the outlet. At the wider end, it has a internal thread M28 and at the narrower end, a external thread M22, both with a fine pitch. The adapter does not screw in but is screwed onto the tap outlet with an external thread M28 instead of the original cap with an aerator. You can then connect an extension, aerator or filter with an internal thread M22 to its narrower end. It is suitable for use in both the kitchen and bathroom, and you can install it yourself.

The adapter is made of brass with a chrome-plated surface, which is shiny and matches common chrome taps. The wider part with the internal thread M28 forms a smooth cylinder from which the narrower external thread M22 extends. The part is compact, so it only extends the outlet by a few millimetres. Brass is a proven material for tap reductions that withstands both cold and hot water. Taps with an external thread M28 are less common, and finding suitable accessories for them can be difficult. This adapter connects them with standard attachments with a thread M22. Therefore, you do not need to replace the entire tap just because a suitable attachment cannot be found, saving you time and money.

  • Type – threaded adapter (reduction) for tap
  • First Thread – internal M28, fine thread, diameter 28 mm
  • Second Thread – external M22, fine thread, diameter 22 mm
  • Material – brass
  • Surface – chrome-plated, shiny
  • Use – connection of aerator, extension or filter with internal thread M22 to outlet with external thread M28
  • Suitable for – kitchen and bathroom taps with an external thread on the outlet
  • Contents of the Package – 1 threaded adapter M28 to M22

Before ordering, please check what thread your tap outlet has. Unscrew the cap with the aerator and measure the external diameter of the thread on the outlet with a caliper. If you measure approximately 28 mm and the thread is on the outside, the adapter is suitable. Insert the sealing ring into the adapter and tighten it evenly without excessive force. Clean the chrome-plated surface with a damp cloth and a gentle non-abrasive cleaner. You can remove limescale with a solution of vinegar or citric acid, and then rinse the part. Keep the original cap with the aerator for possible later use.

The adapter from internal thread M28 to external thread M22 expands the selection of accessories for taps with a thread on the surface of the outlet. Brass with a chrome finish looks neat and is not visually disruptive. You can use it for an aerator, swivel attachment or water filter. Just verify that the outlet has an external thread M28. Then screw on the adapter and connect your chosen attachment to its M22 thread.

Price incl. VAT €12.18