Home page Home page Home & Household Supplies Plumbing Tap aerators and attachments Thread Reducer for Tap from External Thread M26 to External Thread M22 Chrome-Plated Brass Adapter for Rotating Aerator Extension and Filter
Thread Reducer for Tap from External Thread M26 to External Thread M22 Chrome-Plated Brass Adapter for Rotating Aerator Extension and Filter

Thread Reducer for Tap from External Thread M26 to External Thread M22 Chrome-Plated Brass Adapter for Rotating Aerator Extension and Filter

The chrome-plated brass adapter converts the internal thread M26 at the tap outlet to an external thread M22, onto which you can attach an aerator, extension, or filter. Full description
In stock
€12.18
Price incl. VATImport charges will apply
Safe shopping Safe shopping
Overview
Thread Reducer for Tap from External Thread M26 to External Thread M22 Chrome-Plated Brass Adapter for Rotating Aerator Extension and Filter

The thread reducer for the tap addresses the common issue of incompatible threads. On one side, it has a male thread M26 and on the other a male thread M22, both with fine pitch. You screw the reducer into the tap outlet with an internal thread M26 instead of the original aerator, and then connect a part with an internal thread M22 to its narrower end. It can be used in the kitchen, bathroom, or utility room. Installation is straightforward and takes only a moment.

The reducer is made of brass with a chrome-plated surface, which is smooth and shiny, complementing standard taps well. The wider thread M26 and the narrower thread M22 are separated by a short smooth collar, making the part compact and unobtrusive after installation. Brass is a common and proven material for tap reducers for both cold and hot water. The thread M26 is found on some older and newer taps, and suitable accessories for them are difficult to find. With this reducer, you can attach a standard aerator with a thread M22 to such a tap, a rotating extension for easy rinsing of the sink, or a water filter. The outlet is extended by only a few millimetres, and the appearance of the tap remains almost unchanged.

  • Type – thread reducer (adapter) for tap
  • First thread – external M26, fine thread, diameter 26 mm
  • Second thread – external M22, fine thread, diameter 22 mm
  • Material – brass
  • Surface – chrome-plated, shiny
  • Usage – connecting aerator, extension, or filter with internal thread M22 to a tap with internal thread M26
  • Suitable for – kitchen taps, basin taps, sinks
  • Package contents – 1 thread reducer M26 to M22

Before ordering, we recommend measuring the thread on the outlet. After unscrewing the aerator, measure the diameter of the internal thread of the tap with a caliper. If it is approximately 26 mm, this reducer is the correct choice. When installing, do not forget the sealing washer, which will seal the connection, and tighten the threads carefully. The chrome-plated surface can be cleaned with a damp cloth and a mild non-abrasive cleaner to maintain its shine. Limescale can be removed from the surface with a weak vinegar solution, after which the part should be rinsed with clean water. Keep the original aerator of the tap in case you want to reuse it in the future.

The reducer from external thread M26 to external thread M22 is a simple part that allows you to use standard accessories on the tap. Brass with a chrome-plated finish looks good and matches other plumbing fixtures. You will appreciate it when installing an aerator, rotating extension, or water filter. Just verify that the tap outlet has an internal thread M26. Then screw in the reducer and connect the necessary attachment to its thread M22.

Price incl. VAT €12.18