Menu Close
Empty basket
Your basket is currently empty.
Empty basket
0
Choose category
Home page Home page Hobbies & Garden Tools Drills & Accessories Drill Bits TCT Metal Hole Saw 26 mm with Tungsten Carbide Teeth and Guide Drill with Spring Cutting Depth 20 mm Stainless Steel and Wood
TCT Metal Hole Saw 26 mm with Tungsten Carbide Teeth and Guide Drill with Spring Cutting Depth 20 mm Stainless Steel and Wood
TCT Metal Hole Saw 26 mm with Tungsten Carbide Teeth and Guide Drill with Spring Cutting Depth 20 mm Stainless Steel and Wood 1
TCT Metal Hole Saw 26 mm with Tungsten Carbide Teeth and Guide Drill with Spring Cutting Depth 20 mm Stainless Steel and Wood 1
TCT Metal Hole Saw 26 mm with Tungsten Carbide Teeth and Guide Drill with Spring Cutting Depth 20 mm Stainless Steel and Wood 2
TCT Metal Hole Saw 26 mm with Tungsten Carbide Teeth and Guide Drill with Spring Cutting Depth 20 mm Stainless Steel and Wood 3
TCT Metal Hole Saw 26 mm with Tungsten Carbide Teeth and Guide Drill with Spring Cutting Depth 20 mm Stainless Steel and Wood 4
TCT Metal Hole Saw 26 mm with Tungsten Carbide Teeth and Guide Drill with Spring Cutting Depth 20 mm Stainless Steel and Wood 5
TCT Metal Hole Saw 26 mm with Tungsten Carbide Teeth and Guide Drill with Spring Cutting Depth 20 mm Stainless Steel and Wood 6
TCT Metal Hole Saw 26 mm with Tungsten Carbide Teeth and Guide Drill with Spring Cutting Depth 20 mm Stainless Steel and Wood 7

TCT Metal Hole Saw 26 mm with Tungsten Carbide Teeth and Guide Drill with Spring Cutting Depth 20 mm Stainless Steel and Wood

Hole saw with carbide teeth for 26 mm holes in sheet metal, iron, and stainless steel. The titanium guide drill ensures precise centre placement without the hole saw drifting. Full description
In stock
€16.55
Price incl. VATImport charges will apply
Safe shopping Safe shopping
Overview
TCT Metal Hole Saw 26 mm with Tungsten Carbide Teeth and Guide Drill with Spring Cutting Depth 20 mm Stainless Steel and Wood

The TCT hole saw is a tool for drilling circular holes with a diameter of 26 mm into metal materials. The teeth of the saw are fitted with tungsten carbide cutting edges, which reliably cut through stainless steel, iron, and other metals. The centre guide drill with a titanium coating determines the precise location of the hole and keeps the saw aligned throughout the drilling process. The hole is created in one step, without the need for tedious drilling with progressively larger bits. The saw also works well with wood.

A hole with a diameter of 26 mm is often suitable for the passage of pipes, hoses, and cables, for fitting outlets, or for installing locks and fittings into metal doors and cabinets. The cutting edges are arranged alternately left, centre, and right, which helps break the chips into smaller pieces and reduces tool vibration. The useful cutting depth of 20 mm is sufficient for sheets, strips, and the walls of standard profiles. The cut-out disc is ejected from the saw by the spring on the guide drill after completion.

Before drilling, mark the centre of the hole and tap it with a centre punch to prevent the guide drill from drifting on smooth metal. Hold the saw perpendicular to the surface and start with slow speeds until the teeth evenly engage around the circumference. You can then apply a moderate and steady pressure. Secure the workpiece in a vice or clamp it, and support thin sheets with a board to keep the hole round and free of burrs.

  • Type – TCT hole saw (hole cutter) with guide drill
  • Hole diameter – 26 mm
  • Cutting edge material – tungsten carbide
  • Guide drill – with titanium coating and spring for ejecting cut material
  • Cutting depth – 20 mm
  • Shank – 10 mm
  • Length – 80 mm
  • Tooth geometry – alternating left, centre, and right cutting edges
  • Application – stainless steel, iron, and other metals as well as wood
  • Contents – 1 TCT hole saw with a diameter of 26 mm with an attached guide drill and spring

When drilling metal, especially stainless steel, use lower speeds, even pressure, and coolant cutting oil to keep the cutting edges sharp for as long as possible. After finishing work, clean the saw and store it in a dry place. The guide drill is secured in the body of the saw with a screw and can be replaced after wear.

The TCT metal hole saw 26 mm is a practical tool for craftsmen and DIY enthusiasts who need clean circular holes in sheet metal and steel parts. The carbide cutting edges and guide drill with spring ensure precise drilling and easy removal of cut material. It can be used for pipes, cables, outlets, and fittings. It is clamped into a drill by a 10 mm shank. The total length of the saw is 80 mm.

Price incl. VAT €16.55