Menu Close
Empty basket
Your basket is currently empty.
Empty basket
0
Choose category
Home page Home page Hobbies & Garden Tools Drills & Accessories Drill Bits TCT Metal Hole Saw 20 mm with Carbide Teeth and Titanium Pilot Drill with Spring Depth of Cut 20 mm for Stainless Steel, Iron and Wood
TCT Metal Hole Saw 20 mm with Carbide Teeth and Titanium Pilot Drill with Spring Depth of Cut 20 mm for Stainless Steel, Iron and Wood
TCT Metal Hole Saw 20 mm with Carbide Teeth and Titanium Pilot Drill with Spring Depth of Cut 20 mm for Stainless Steel, Iron and Wood 1
TCT Metal Hole Saw 20 mm with Carbide Teeth and Titanium Pilot Drill with Spring Depth of Cut 20 mm for Stainless Steel, Iron and Wood 1
TCT Metal Hole Saw 20 mm with Carbide Teeth and Titanium Pilot Drill with Spring Depth of Cut 20 mm for Stainless Steel, Iron and Wood 2
TCT Metal Hole Saw 20 mm with Carbide Teeth and Titanium Pilot Drill with Spring Depth of Cut 20 mm for Stainless Steel, Iron and Wood 3
TCT Metal Hole Saw 20 mm with Carbide Teeth and Titanium Pilot Drill with Spring Depth of Cut 20 mm for Stainless Steel, Iron and Wood 4
TCT Metal Hole Saw 20 mm with Carbide Teeth and Titanium Pilot Drill with Spring Depth of Cut 20 mm for Stainless Steel, Iron and Wood 5
TCT Metal Hole Saw 20 mm with Carbide Teeth and Titanium Pilot Drill with Spring Depth of Cut 20 mm for Stainless Steel, Iron and Wood 6
TCT Metal Hole Saw 20 mm with Carbide Teeth and Titanium Pilot Drill with Spring Depth of Cut 20 mm for Stainless Steel, Iron and Wood 7

TCT Metal Hole Saw 20 mm with Carbide Teeth and Titanium Pilot Drill with Spring Depth of Cut 20 mm for Stainless Steel, Iron and Wood

Hole saw for clean 20 mm holes in sheet metal, profiles and stainless steel. Carbide tips cut evenly and the pilot drill determines the exact centre of the hole. Full description
In stock
€14.80
Price incl. VATImport charges will apply
Safe shopping Safe shopping
Overview
TCT Metal Hole Saw 20 mm with Carbide Teeth and Titanium Pilot Drill with Spring Depth of Cut 20 mm for Stainless Steel, Iron and Wood

The TCT hole saw is a tool for cutting circular holes with a diameter of 20 mm in metal. The teeth of the saw are fitted with tungsten carbide tips, which can handle stainless steel, iron and other metals. The centre pilot drill with a titanium coating marks the location of the hole and keeps the saw aligned from start to finish. The hole is created in a single pass, eliminating the need for multiple drill bits. The saw can also be used in wood.

A hole with a diameter of 20 mm is useful for installing cable glands and outlets, routing pipes and hoses through metal walls, or modifying metal frames and shelves. The tips are arranged alternately left, centre and right, so each tooth removes only a portion of the material, allowing for a smooth cut with reduced vibrations. The useful depth of cut 20 mm corresponds to standard sheets and walls of steel profiles. The cut disc is ejected from the saw by the spring on the pilot drill after completion.

Before drilling, mark the centre of the hole and punch it with a centre punch to prevent the tip of the pilot drill from slipping on smooth metal. Position the saw perpendicular to the surface and start the cut at slow speeds until the teeth engage all around. Only then should you apply a slight and steady pressure. Secure the workpiece firmly in a vice or clamp and place a wooden board underneath thin sheet metal to prevent it from bending and to keep the edge of the hole straight.

  • Type – TCT hole saw (hole cutter) with pilot drill
  • Diameter of hole – 20 mm
  • Material of tips – carbide (tungsten carbide)
  • Pilot drill – with titanium coating and spring for ejecting the cut material
  • Depth of cut – 20 mm
  • Shank – 10 mm
  • Length – 80 mm
  • Tooth geometry – alternating left, centre and right tips
  • Usage – stainless steel, iron and other metals as well as wood
  • Contents of package – 1 TCT hole saw with a diameter of 20 mm with an attached pilot drill and spring

When drilling steel and especially stainless steel, use lower speeds with even pressure and coolant cutting oil, which reduces the temperature of the tips and facilitates chip removal from the cut. After finishing work, clean the saw of chips and store it in a dry place. The pilot drill is secured in the body of the saw with a screw, so you can replace it after wear.

The TCT 20 mm hole saw is a useful tool for workshops, electrical installations and assemblies where a precise circular hole in metal is required. The carbide teeth ensure a clean cut and the pilot drill with spring allows for precise drilling and easy removal of the cut material. It is suitable for glands, outlets, pipes and fittings. It is clamped in the drill chuck by the 10 mm shank. The total length of the saw is 80 mm.

Price incl. VAT €14.80